AZ7671 Datasheet, PDF (1/2 Pages) American Zettler, Inc. – 10 AMP SUBMINIATURE POWER RELAY

AZ7671
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• Small footprint
• Low cost
• Epoxy sealed version available
• 10 Amp switching
• UL, CUR E44211
• TuV pending
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 150 W
1250 VA
Max. switched current: 10 A
Rated Load
UL, CUR
Max. switched voltage: 30 VDC or 277 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
5A at 250 VAC
10A at 125 VAC
4.2 A at 277 VAC
TUV
1/4 HP at 120/240/277 VAC
TV - 5 at 120 VAC
Pilot Duty at
24 VA, 24 VAC
125 VA at 120/240/277 VAC
C150 at 120 VAC
5A at 250 VAC
5A at 28 VDC
Material
Resistance
silver nickel
<100 milliohms initially
(24 V, 1 A voltage drop method)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 5 A 240 VAC Res.
Operate Time (typical) 8 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F), standard
Storage
-40°C (-40°F) to 130°C (266°F)
Vibration
0.062" DA at 10–50 Hz
Shock
100g for 11ms 1/2 sine pulse
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
253 mW standard
113 mW sensitive
1.25 W at 20°C (68°F) ambient
41°C (74°F) at nominal coil voltage, standard
22°C (40°F) at nominal coil voltage, sensitive
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
10/2/08 W