English
Language : 

AZ764 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – 16 A SPDT MINIATURE POWER RELAY
AZ764
16 A SPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• Low height: 15.7 mm
• Epoxy sealed version available
• 16 Amp switching
• AC and DC coils
• Isolation spacing greater than 10 mm
• Proof tracking index (PTI/CTI) 250
• Surpasses requirements of VDE 0631/0700
• UL, CUR file E43203; VDE 112904
CONTACTS
Arrangement
Ratings
Rated Load
UL, CUR
VDE
Material
Resistance
SPDT (1 Form C)
SPST (1 Form A)
Resistive load:
Max. switched power: 480 W or 4000 VA
Max. switched current: 16 A
Max. switched voltage: 300* VDC or 400 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
16 A at 250 VAC resistive
16 A at 250 VAC
Silver tin oxide
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
200 mW (DC coil)
.422 VA (AC coil)
1.7 W at 20°C (68°F) ambient
26°C (47°F) at nominal coil voltage
115°C (239°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
3 x 107
1 x 105 at 16 A 240 VAC res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 10% of nominal coil voltage - DC
Greater than 15% of nominal coil voltage - AC
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 90°C (194°F) - DC coils
-40°C (-40°F) to 75°C (167°F) - AC coils
-40°C (-40°F) to 115°C (239°F)
Vibration
0.062" DA at 10–55 Hz
Shock
30 g
Enclosure
P.B.T. polyester, UL-94 ; V0
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 Seconds
Weight
14 grams
06/08/05W