AZ6975 Datasheet, PDF (1/3 Pages) American Zettler, Inc. – Epoxy sealed version available

AZ6975
10 AMP MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• Low cost
• Epoxy sealed version available
• 10 Amp switching — single pole contacts
• Isolation spacing greater than 8mm
• Class F insulation system available
• UL, CUR file E44211
• TUV R50290835
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 300 W or 2500 VA
Max. switched current: 10 A
Max. switched voltage: 30* VDC or 250 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory
Rated Load
UL, CUR
Normally Open Contacts (N.O.)
10 A at 250 VAC, Resistive,100k cycles 85°C
10 A at 30 VDC, Resistive 100k cycles 85°C
1_{/6 HP at 250 VAC, 100k cycles 85°C}
Normally Closed Contacts (N.C.)
5 A at 250 VAC, Resistive, 100k cycles 85°C
5 A at 30 VDC, Resistive, 100k cycles 85°C
TUV
Material
5A NO / 3A NC @ 250VAC / 30VDC, 100k cycles, 85°C
10A NO / 5A NC @ 250VAC / 30VDC, 100k cycles, 85°C
16A NO / 8A NC @ 250VAC / 30VDC, 100k cycles, 85°C
Silver tin oxide
Resistance
100 milliohms max
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
353 mW (Standard) 300mW (Sensitive)
1.2 W at 20°C (68°F) ambient
0.9 W at 20°C (68°F) ambient
40° C (104°F) at nominal voltage
Max. 105°C (221°F)
Max. 155°C (311°F) Class F
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 10 A 250 VAC Res.
Operate Time (max)
15 ms at nominal coil voltage (standard)
20 ms at nominal coil voltage (sensitive)
Release Time (max)
8 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 VAC contact to coil
(at sea level for 1 min.) 1000 VAC between open contacts
10,000 V surge contact to coil
Insulation Resistance 1000 megohms min. at 500 VDC
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 105°C (266°F)
Vibration
0.059" DA at 10–55 Hz
Shock
Mechanical
Operational
100G
10 G
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
13 grams
NOTES
1. All values at 23°C (73.4°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
5/21/15