AZ2510 Datasheet, PDF (1/2 Pages) American Zettler, Inc. – 100 AMP LATCHING POWER RELAY

AZ2510
100 AMP LATCHING
POWER RELAY
FEATURES
• 100 Amp switching
• Heavy loads to 24000 VA
• 4 kV dielectric
• Meets 8 mm creepage
• Mechanical position indicator which may be also used
for manual operation or to actuate a micro-switch
• UL, CUR pending
CONTACTS
Arrangement
Ratings
Rated Load
UL, CUR
Material
Resistance
SPST (1 Form A)
Resistive load:
Max. switched power: 3000 W, 24000 VA
Max. switched current: 100 A
Max. switched voltage: 30 VDC, 400 VAC
100 A at 240 VAC, 10k cycles, Resistive
Silver tin oxide
< 2 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Temperature
1.44 W single coil
2.88 W dual coil
Max. 105°C (2221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Allow suitable slack on leads when wiring, and do not subject the
terminals to excessive force.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁶
1 x 10⁴ at 100 A 240 VAC Res.
Set and Reset
Pulse Duration
36 ms minimum
Set Time (typical)
12 ms at nominal coil voltage
Reset Time (typical) 6 ms at nominal coil voltage
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 2000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Creepage Distance
8 mm
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
Shock
Operating
10 g, 11 ms, ¹/2 sine (no false operation)
Non-Operating 100 g, 11 ms, ¹/2 sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
P. C. (coil), heavy tabs (power)
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
82 grams
1/21/09W