AZ2505 Datasheet, PDF (1/4 Pages) American Zettler, Inc. – Heavy loads to 30000 VA

AZ2505
120 AMP LATCHING
POWER RELAY
FEATURES
• Low cost
• 120 Amp switching
• Heavy loads to 30000 VA
• 4 kV dielectric
• Single or Dual Coil Latching available
• Multiple Termination Options
• UL pending
CONTACTS
Arrangement
Ratings
Rated Load
UL, CUR
Material
Resistance
SPST-NO (1 Form A)
SPST-NC (1 Form B)
Resistive load:
Max. switched power: 30000 VA
Max. switched current: 120 A
Max. switched voltage: 250 VAC
60 A at 250 VAC
80 A at 250 VAC
100 A at 250 VAC
120 A at 250 VAC
silver alloy
< 2 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
563 mW Single Coil
1.125 W Dual Coil
NOTES
1. All values at 23°C (73.4°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Allow suitable slack on leads when wiring, and do not subject the
terminals to excessive force.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁶
1 x 10⁴ at 60 A, 250 VAC Res.
Set Time (max)
20 ms at nominal coil voltage
Reset Time (max)
20 ms at nominal coil voltage
Dielectric Strength
4000 VAC coil to contact
(at sea level for 1 min.) 1500 VAC between open contacts
Insulation
Resistance
1000 megohms min. at 500 VDC
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (194°F)
Storage
-40°C (-40°F) to 90°C (194°F)
Vibration
0.059" DA at 10–55 Hz
Operating Humidity 20 - 85%RH (non-condensing)
Shock
Operating
10 g
Non-Operating 100 g
Enclosure
P.B.T. polyester
Terminals
Quick connect terminal
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
50 grams
11/20/2014