AZ2500 Datasheet, PDF (1/3 Pages) American Zettler, Inc. – 60 AMP LATCHING POWER RELAY

AZ2500
60 AMP LATCHING
POWER RELAY
FEATURES
• Low cost
• 60 Amp switching
• Heavy loads to 15000 VA
• 4 kV dielectric
• Epoxy sealed construction available
• UL, CUR file E43203
CONTACTS
Arrangement
Ratings
Rated Load
UL, CUR
Material
Resistance
SPST (1 Form A)
Resistive load:
Max. switched power: 15000 VA
Max. switched current: 60 A
Max. switched voltage: 400 VAC
60 A at 250 VAC, 6k cycles, General Use
50 A at 250 VAC, 10k cycles, General Use
40 A at 250 VAC, 100k cycles, General Use
Silver cadmium oxide or silver tin oxide
< 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Temperature
666 mW single coil
1.3 W dual coil
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Allow suitable slack on leads when wiring, and do not subject the
terminals to excessive force.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁶
1 x 10⁵ at 40 A 250 VAC Res.
Set and Reset
Pulse Duration
50 ms minimum
Set Time (typical)
20 ms at nominal coil voltage
Reset Time (typical) 20 ms at nominal coil voltage
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Creepage Distance
8 mm
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
Shock
Operating
20 g, 11 ms, ¹/2 sine (no false operation)
Non-Operating 100 g, 11 ms, ¹/2 sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
P. C. (coil), heavy tabs (power)
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
33 grams
10/26/06W