AZ2280 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 30 AMP MINIATURE POWER RELAY

AZ2280
30 AMP MINIATURE
POWER RELAY
FEATURES
• Quick-connect leads for contacts and coil
• 1 Form A, B and C contacts available
• AC and DC coils available
• Expoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR file E44211
• TÜV pending
CONTACTS
Arrangement SPST (1 Form A, or B)
SPDT (1 Form C)
Ratings
UL, CUR
Resistive load:
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A (Form A)
15 A (Form B)
Max. switched voltage: 277 VAC, 28 VDC
1 Form A
30 A at 277 VAC, General Use [1][2]
2 Hp at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
30 A at 28 VDC [1]
20/60 (FLA/LRA) at 277 VAC 30k cycles [1]
1 Form B
15 A at 277 VAC, General Use [1]
10 A at 28 VDC [1]
0.5 HP at 250 VAC [1]
0.25 HP at 125 VAC [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles [1]
Material
Resistance
1 Form C
30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2]
20/10 A (N.O./N.C.) at 28 VDC[1]
2/0.5 HP (N.O./N.C.) at 250 VAC[1][2]
1/0.25 HP (N.O./N.C.) at 125 VAC[1][2]
20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1]
Silver cadmium oxide [1], silver tin oxide [2]
< 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
DC: 500 mW
AC: 1.4 VA
DC: 1.7 W at 20°C (68°F)
AC: 2.7 VA at 20°C (68°F)
38°C (68°F)
Max. 155°C (311°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 30 A 120 VAC Res. N.O.
Operate Time
15 ms at nominal coil voltage
Release Time
10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to contact
(at sea level for 1 min.) 2500 Vrms contact to coil
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout
DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-55°C (-67°F) to 85°C (185°F)
Storage
-55°C (-67°F) to 155°C (311°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, Quick Connects
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
36 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
6/13/06W