AZ2150W Datasheet, PDF (1/2 Pages) ZETTLER Electronics – 30 AMP MINIATURE POWER RELAY

AZ2150W
30 AMP MINIATURE
POWER RELAY
FEATURES
• 1.75 mm contact gap
• DC coils up to 48V
• High dielectric strength version available
• All plastics PTI 250
• Epoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR E44211
• VDE 40023154
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 900 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 240 VDC* or 440 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
UL, CUR 30 A at 277 VAC, General Use, Resistive
VDE 20 A at 250 VAC, AC7a
Material
Resistance
Silver tin oxide
< 50 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
500 mW
1.7 W at 20°C (68°F) ambient
43°C (77°F) at nominal coil voltage
155°C (311°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
2 x 10⁵
3 x 10⁴ at 30 A 250 VAC Res.
Operate Time
15 msec max. at nominal coil voltage
Release Time
10 msec max. at nominal coil voltage
(without suppression)
Dielectric Strength
(at sea level for 1 min.)
1500 Vrms contact to contact
2500 Vrms contact to coil
3000 Vrms contact to coil “T” version
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
-40°C (-40°F) to 85°C (185°F) - DC coils
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.,
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
36 grams
Packing unit in pcs 40 per plastic tray / 280 per carton box
2/18/11