G154I1-L01 Datasheet, PDF (6/26 Pages) AZ Displays – TFT LCD Approval Specification

Issued Date: Nov.24, 2008
Model No.: G154I1 - L01
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Operating Ambient Temperature
Storage Temperature
Symbol
T_OP
T_ST
Value
Min.
Max.
-30
+80
-40
+85
Unit
Note
ºC
(1)
ºC
(1)
Test Item
High Temperature Storage Test
Low Temperature Storage Test
Thermal Shock Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
ESD Test (Operation)
Shock (Non-Operating)
Vibration (Non-Operating)
Test Condition
85ºC, 240hours
-40ºC, 240hours
-30ºC, 0.5hour~85ºC, 0.5hour, 100 cycles
80ºC, 240hours
-30ºC, 240hours
60ºC 90%RH, 240hours
±8KV
50G/11ms
1.5G
Note
(1) (3)
(1)
(1)(2)
(1)(2)
Note (1) No display malfunctions.
Note (2) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Note (3) Temperature of panel display surface area should be 85 ºC Max.
Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification
is judged before the reliability test
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item
Symbol
Value
Min.
Max.
Unit
Power Supply Voltage
V_CC
-0.3
+4.0
V
Logic Input Voltage
V_IN
-0.3
V_CC+0.3
V
Note
(1)
2.2.2 BACKLIGHT UNIT
Item
Lamp Voltage
Lamp Current
Lamp Frequency
Symbol
V_L
I_L
F_L
Value
Min.
Max.
2.5
7.5
40
80
Unit
V_RMS
mA_RMS
KHz
Note
(1), (2), I_L = 7.0 mA
(1), (2)
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for lamp (Refer to 3.2 for further information).
6 / 26
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 2.0