G121X1-L03 Datasheet, PDF (6/26 Pages) AZ Displays – TFT LCD Tentative Specification

Issued Date: Feb. 9, 2009
Model No.: G121X1-L03
Tentative
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Operating Ambient Temperature
Storage Temperature
Symbol
T_OP
T_ST
Value
Min.
Max.
-30
+80
-40
+85
Unit
Note
ºC
ºC
Test Item
High Temperature Storage Test
Low Temperature Storage Test
Thermal Shock Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
Shock (Non-Operating)
Vibration (Non-Operating)
Test Condition
85ºC, 240 hours
-40ºC, 240 hours
-30ºC, 0.5hour 80 , 0.5hour; 1hour/cycle,100cycles
80ºC, 240 hours
-30ºC, 240 hours
60ºC, 90%RH, 240hours
200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
Note
(1)(2)
(3)
(3)
Note (1) There should be no condensation on the surface of panel during test.
Note (2) Temperature of panel display surface area should be 90 ºC Max.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so
that the module would not be twisted or bent by the fixture.
Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification
is judged before reliability test.
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item
Symbol
Value
Min.
Max.
Unit
Power Supply Voltage
Vcc
-0.3
5.25
V
Logic Input Voltage
V_IN
-0.3 Vcc+0.25
V
Note
(1)
(1)
2.2.2 BACKLIGHT UNIT
Item
Symbol
Value
Min.
Max.
Unit
Converter Voltage
V_i
10.8
13.2
V
Converter Current
I_i
-
1.0
A
Note
(1) , (2)
(1) , (2)
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function
operation should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for lamp (Refer to 3.2 for further information).
6 / 26
Version 0.0