G104V1-T01 Datasheet, PDF (6/26 Pages) AZ Displays – TFT LCD Approval Specification

Doc. No.:
Issued Date : Aug.9.2006
Model No :G104V1-T01
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
No.
Test Item
1 High Temperature Storage Test
80 , 240 hours
Test Condition
Note
2 Low Temperature Storage Test
-20 , 240 hours
3 Thermal Shock Storage Test
-20 , 0.5hour 80 , 0.5hour; 100cycles, 1hour/cycle
4 High Temperature Operation Test 70 , 240 hours
(1) (2)
5 Low Temperature Operation Test -20 , 240 hours
6
High Temperature & High Humidity
Operation Test
60
, RH 90%, 240hours
7 Heat Cycle Operation Test
-20 , 1hour 70 , 1hour; 50cycles, 4hour/cycle
8 ESD Test (Operation)
150pF, 330 , 1sec/cycle
Condition 1 : panel contact, 8KV
Condition 2 : panel non-contact 15KV
9 Shock (Non-Operating)
220G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
(2)
(2)(3)
10 Vibration (Non-Operating)
1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
(2)(3)
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) No display malfunctions.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Note (4) The temperature of panel display surface area should be 80 ºC Max.
6 / 26
Version 2.1