|
ATM0700L6A-CT Datasheet, PDF (5/23 Pages) AZ Displays – SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY | |||
|
◁ |
ATM0700L6A-CT(AZ DISPLAYS) TFT MODULE VER1.2
3.0 PIN ASSIGNMENT
Connector on LCM : HIROSE DF19G-20P-1H or compatible,mating with HIROSE DF19-20S-1C or
compatible
Pin No.
Symbol
Function
1
TX0-
Negative LVDS differential data input(R0-R5,G0)*3
2
TX0+
Positive LVDS differential data input(R0-R5,G0)*3
3
VSS*1
Ground
4
TX1-
Negative LVDS differential data input(G1-G5,B0-B1)*3
5
TX1+
Positive LVDS differential data input(G1-G5,B0-B1)*3
6
VSS*1
Ground
7
TX2-
Negative LVDS differential data input(B2-R5,HS,VS,DE)*3
8
TX2+
Positive LVDS differential data input(B2-R5,HS,VS,DE)*3
9
VSS*1
Ground
10
CLK-
Clock Signal(-)
11
CLK+
Clock signal(+)
12
VSS*1
Ground
13
NC*2
Non Connection(open)
14
NC*2
Non Connection(open)
15
VDD
+3.3V power supply for logic and LCM power
16
VDD
+3.3V power supply for logic and LCM power
17
BL+
+5.0V Backlight driving circuit power supply
18
BL-
Backlight driving circuit ground
19
PWM
Backlight ON/OFF/Dimming control(PWM:100~1000HZ, 0~100%)
20
VSS*1
Ground
Note 1) Please connect VSS pin to ground. Donât use it as no-connect nor connection with high impedance.
Note 2) Please connect NC pin to nothing. Donât connect it to ground nor to other signal input.
Note 3) Refer to next page.
AZ DISPLAYS
4
|
▷ |