|
ATP0644-3 Datasheet, PDF (4/7 Pages) AZ Displays – SPECIFICATIONS FOR STANDARD RESISTIVE TOUCH PANEL | |||
|
◁ |
AZ DISPLAYS, INC.
ATP0644-3
⢠⢠4.4 ENVIRONMENTAL
Operating Temperature (*):
Storage Temperature:
Operating Humidity:
Storage Humidity:
Chemical Resistance:
Low Air Pressure:
-0ËC to 50ËC
-20ËC to 70ËC
20% to 85% RH with a Maximum wet bulb temperature of 38ËC
10% to 90% RH with a Maximum wet bulb temperature of 38ËC
Coating with the following chemicals and storing at room temperature for 2
hours gives no problems. 10% NaCl-water solution, ethyl-acetate, ethyl-
alcohol, toluene, methyl-ethyl-ketone
No issues down to 0.5 x Normal Air pressure
⢠⢠4.5 PEN LIFE
Note taking life:
100,000 words minimum
Input life :
1,000,000 times minimum
Note 1:
Words are written in the notes area and the size of the word is 7.5mm x 6.75mm. A word
is any Alphabet / Number / Mark. A pen applies a force of 250g. A failure is judged to happen when
the current consumption or insulation resistance or dielectric strength are not met as shown in 4.3.
The location accuracy with 9 point calibration must be ± 4.4 mm max.
Effective input area
Notes
10mm
⢠⢠4.6 FINGER LIFE
A finger is simulated by a silicon rubber plunger R8 (Round type 8mm size) hardness 60ËC at 200g
at frequency 5Hz.
A failure is judged to happen when the current consumption or insulation resistance or dielectric
strength are not met as shown in 5.3. The location accuracy with 9 point calibration must be ±4.4 mm max.
Operating force is 150g max.
Page 4 of 7
|
▷ |