|
C0240QGLB-T Datasheet, PDF (19/24 Pages) AZ Displays – Approval Product Specification | |||
|
◁ |
Document No.:
RESETB
I
Reset pin initializes the IC when low. Should be reset after
power-on.
MVDD
O
Internal power for RAM. Connect a capacitance to gnd. Connect a
capacitance (1u/10v) to gnd.
VREG1OUT
O
A reference level for the grayscale voltage. Connect a capacitance
(1u/10v) to gnd.
VCI
I Power supply for analog circuit (2.5v~3.3v)
VGH
O
The positive voltage used in the gate driver. Connect a capacitance
(1u/10v) to gnd.
VGL
O
The negative voltage used in the gate driver. Connect a capacitance
(1u/10v) to gnd.
GND
Ground
Xâ
For touch screen
Yâ
For touch screen
X+
For touch screen
Y+
For touch screen
19
|
▷ |