ATM0500D13E-CT1 Datasheet, PDF (14/18 Pages) AZ Displays – SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

ATM0500D13E-CT1(AZ DISPLAYS)TFT MODULE V1.0
5. RELIABILITY TEST
Item
High temperature
storage
Low temperature
storage
High temperature
operation
Low temperature
operation
High temperature/High
humidity operation
Thermal Shock
Vibration test
Mechanical shock
Package vibration test
Package drop test
Electro static discharge
Test Condition Item
Ta= 80 ºC 240hrs
Ta=-30 ºC 240hrs
Ts= 70 ºC 240hrs
Ts=-20 ºC 240hrs
90% RH 60ºC 240hrs
-30℃/30 min ~ +70℃/30 min for a total 100
cycles, Start with cold temperature and end
with high temperature.
Freq:10~55~10Hz
Amplitude:1.5mm
2 hours for each direction of X,Y,Z
(6 hours for total)
100G 6ms,±X, ±Y, ±Z 3 times for each
direction
Random Vibration :
0.015G*G/Hz from 5-200HZ, -6dB/Octave
from 200-500HZ
2 hours for each direction of X. Y. Z.
(6 hours for total)
Height:60 cm
1 corner, 3 edges, 6 surfaces
± 2KV, Human Body Mode, 100pF/1500Ω
Remark
Note 1
Note 4
Note 1
Note 4
Note 2
Note 4
Note 1
Note 4
Note 4
Note 4
Note 1: Ta is the ambient temperature of samples.
Note 2: Ts is the temperature of panel’s surface.
Note 3: In the standard condition, there shall be no practical problem that may affect the
display function. After the reliability test, the product only guarantees operation,
but don’t guarantee all of the cosmetic specification.
Note 4: Before cosmetic and function test, the product must have enough recovery time, at least 2 hours
at room temperature.
AZ DISPLAYS
13