AXPLO10 Datasheet, PDF (1/3 Pages) Advanced XTAL Products – Phase-Locked 10 MHz OCXO (PLOCXO)

Designed and
Manufactured
in Germany
Specification AXPLO10
Rev.: 2 Date: 2014-06-20
Oscillator type: Phase-Locked 10 MHz OCXO (PLOCXO)
Delivers a low noise output from a 10 MHz reference input signal
Parameter
min. typ. max. Unit Condition
Nominal output frequency f_OUT
Frequency stability (free running)
frequency tolerance
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per day
Long term (aging) per year
Reference input
Input frequency f_REF
Frequency accuracy
Signal waveform
Input level
Input impedance
RF output
Signal waveform
Load R_L
Amplitude
Harmonics
Phase noise
Lock detect (LD) output
Supply voltage V_S
Current consumption (warm-up)
Current consumption (steady state)
Operating temperature range
10.000
MHz
±1
±2 ppm
±10 ppb
±2 ppb
±2 ppb
±1 ppb
±50 ppb
10.000
MHz
±0.5 ppm
Sine wave
0
+13 dBm
50
Ω
Sine wave
50
Ω
+7
dBm
-30 dBc
Consult factory
0
1.5 V
3.5
5
V
11.4 12.0 12.6 V
450 mA
200 mA
-10
+60 °C
Note 2
V_S ±5%
R_L ±5%
after 30 days operation
after 30 days operation
Note 3
±5%
Note 4
Note 5
Out of lock
Locked
Note 6
@ +25°C
Enclosure (see drawing) (LxWxH)
54x40x19
mm
h = 2.0
Weight
60 g
Packing
Palette
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Other output frequency on request with f_OUT = f_REF·M or f_OUT = f_REF·M/N
3. Other input frequency on request
4. Higher output level (up to 15 dBm) on request
5. To be optimized to application w.r.t to phase noise
6. Other supply voltage on request
Absolute Maximum Ratings
Parameter
Supply Voltage V_S
Reference Input Level
Storage Temperature
min.
max. Unit
Condition
-0.5
V_S + 10% V
V_S to GND
-
+15 dBm
-55
+125 °C
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXPLO10 Rev.2
Drawing D0
Page 1(3)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]