AXON20 Datasheet, PDF (1/3 Pages) Advanced XTAL Products – PLXO - Phase-Locked Crystal Oscillator – Low Phase Noise

Designed and
Manufactured
in Germany
Specification AXON20
Rev.: 2 Date: 2014-06-20
Oscillator type: PLXO - Phase-Locked Crystal Oscillator – Low Phase Noise
Parameter
min. typ. max. Unit Condition
Reference frequency (input) f_REF
Output frequency f_OUT
Frequency stability (free running)
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per year
Reference input
Frequency accuracy
Signal waveform
Input level
Input impedance
Input capacitance
Frequency locking
Frequency locking range
VCXO Control Voltage (V_C) output
Lock detect (LD) output
Loop filter parameters
Natural loop frequency f_N
Phase margin Φ_R
Channel spacing f_CH
Lock-in time
RF output (locked)
Signal waveform
Load
Rise & decay time
Symmetry (duty cycle)
Suppression of channel spurious
Other non-harmonic spurious
Phase noise
Supply voltage V_S
Current consumption
Operating temperature range
5
100 MHz
80
160 MHz
±10 ppm
±2 ppm
±2 ppm
±2 ppm
±2 ppm
Sine or square wave
0.5
V_S Vp-p
10
kΩ
10 pF
Lock on f_REF under worst
conditions over 10 years
0.15
3.00 V
LD = High PLL locked
LD = Low PLL out of lock
Note 3
Hz
Note 3
°
Note 3
kHz
Note 3
s
HCMOS
15
pF
5 ns
40
60 %
-80
dBc
-100
dBc
Consult factory
3.15
3.3
3.45 V
50 mA
-20
+70 °C
Note 2
V_S ±5%
Load ±10%
@ +40°C
R_IN = 470 kΩ
HCMOS levels
±10%
@ V_S/2
@ N·f_CH and f_OUT ± N·f_CH
Note 4
Enclosure (see drawing) (LxWxH)
20.0x13.1x6.1 max.
mm IEC 61837-4 CO 29
Weight
3g
Packing
Tape & Reel
IEC 60286-3
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Internal Low Phase Noise VCXO
3. To be optimized to application w.r.t to phase noise and settling performance. Please consult factory
4. 5V supply voltage on request
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXON20 Rev.2
Drawing D0
Page 1(3)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]