AXON1000 Datasheet, PDF (1/3 Pages) Advanced XTAL Products – UHF Low Noise Phase-Locked Oscillator (PLO)

Designed and
Manufactured
in Germany
Specification AXON1000
Rev.: 1 Date: 2016-08-19
Oscillator type: UHF Low Noise Phase-Locked Oscillator (PLO)
Parameter
min. typ. max. Unit Condition
Reference frequency (input) f_REF
Output frequency f_OUT
Frequency stability (free running)
frequency tolerance
vs. operating temperature range
Reference input
Frequency accuracy
Signal waveform
Input level
Input impedance
RF output
Signal waveform
Load R_L
Output level
Harmonics
Spurious
PLL Products
Phase noise (Note 2)
Lock detect (LD) output
Supply voltage V_S
Current consumption
Operating temperature range
10
150 MHz
300
3000 MHz
±20 MHz
±10 ±20 MHz
±10 ppm
Sine wave
+0
+13 dBm
50
Ω
Sine wave
50
Ω
+7
+10
dBm
-30 dBc
-80 dBc
-60 dBc
Consult factory
0
1.5 V
3.5
5
V
11.4 12.0 12.6 V
100 150 mA
-20
+70 °C
±5%
Out of lock
Locked
Enclosure (see drawing) (LxWxH)
54x40x19
mm
h = 2.0
Weight
60
g
Packing
Palette
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. PLL will be optimized to application w.r.t. phase noise
Absolute Maximum Ratings
Parameter
Supply Voltage V_S
Reference Input Level
Storage Temperature
min.
max. Unit
Condition
-0.5
V_S + 10% V
V_S to GND
-
+15 dBm
-55
+105 °C
Ordering Code
Model
Input
Output
Frequency [MHz] Frequency [MHz]
AXON1000
100
1000
Example: AXON1000-100-1000_Rev.1
Revision
Rev.1
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXON1000 Rev.1
Drawing D0
Page 1(3)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]