AXLE30S Datasheet, PDF (1/2 Pages) Advanced XTAL Products – TCXO with Stratum III stability incl. holdover

Specification AXLE30S
Issue: 02 Date: 2005-05-22
Oscillator type : TCXO with Stratum III stability incl. holdover
Parameter
min. typ. max. Unit Condition
Frequency range
Standard frequencies
Frequency stability
Initial tolerance
vs. temperature in operating
temperature range (steady state)
vs. supply voltage variation
vs. load change
24 hours drift
1.5
40
1.544 /12.800 / 16.384 /
19.440 / 20.000 / 38.880
± 0.5
Frequency stability
± 0.28
± 0.28
± 0.28
± 0.1
± 0.1
± 0.04
MHz
MHz
ppm
ppm
ppm
ppm
ppm
ppm
ppm
ppm
24 hours holdover in operating
± 0.37 ppm
temperature range and V_S ± 1 %
long term (aging) over 15 year
Long term stability (overall)² 15
± 3.5 ppm
± 4.6 ppm
years
Frequency adjustment range
Electronic Frequency Control (EFC
N.A.
ppm
RF output
Signal waveform
HCMOS
Load
15
pF
Rise & decay time
5 ns
Symmetry (duty cycle)
45
55 %
Start-up time
10 ms
Supply voltage V_S
3.13 3.3
Current consumption (steady state)
3.47 V
15 mA
Enable/disable function (Option II) Pin 2 = HIGH or OPEN: Output Enable
Pin 2 = LOW: Output High Z
Operable temperature range
-45
+90 °C
Storage temperature range
-45
+90 °C
@+25°C
Temperature
0°~+70°C
-20°~+70°C
-40°~+85°C
Option I
“728”
“2728”
“828”
GR-1244-CORE or
ITU G.813
@ +40°C
See Note 2
N.A.
@ V_S/2
@ V_S – 5%
@ +25°C
Option II = “Z”
Enclosure (see drawing) LxWxH
25.6 x 22.7 x 7.6max. mm
IEC 61837 CO 28
Weight
9
gram
Packing
Tape & reel
IEC 60286-3
ESD Sensitivity
1500
V
HBM as in IEC 61000-4-2
Notes:
1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated
2. Overall frequency stability = initial tolerance + temp.stability + supply & load change + aging
Ordering Code:
Model (Specification)
AXLE30S
Option I Option II Frequency [MHz]
728
Z 12.800
GmbH & Co. KG
Wasemweg 5
D-74821 Mosbach
Germany
AXLE30S
page 1(2)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]