AXLE207M Datasheet, PDF (1/4 Pages) Advanced XTAL Products – (VC)TCXO in DIL14 package

Specification AXLE207M
Oscillator type: (VC)TCXO in DIL14 package
Rev.: 1 Date: 2014-04-06
Parameter
min. typ. max. Unit Condition
Frequency range
Frequency stability
vs. operating temperature range
vs. supply voltage variation
vs. load change
Long term (aging) per year
Frequency adjustment range
Mechanical (internal trimmer)
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC input impedance
RF output
Signal waveform
Load
Amplitude
Supply voltage V_S
Current consumption
(Note 2)
6
190 MHz
6
190 MHz
1
800
ppm
±0.5 to ±5
ppm
See tables 1 & 2
±0.1 ±0.3 ppm
±0.2 ppm
±1 ppm
Clipped Sine wave
Sine wave
HCMOS, PECL, LVDS
Option 4 & 5
V_S ±5 %
Load ±10 %
@+40°C
±3
ppm
±5
ppm
0.15 1.65 3.15 V
0.5
2.5
4.5 V
Positive
100
kΩ
Option 1 = blank
Option 1 = “V”
Option 2 = “3”
Option 2 = “5”
Clipped Sine wave
Sine wave
HCMOS
PECL
LVDS
10 kΩ || 10 pF
50 Ω
15 pF
50 Ω + Bias
0.8
V p-p
1.0
V p-p
0
dBm
+10
dBm
According to relevant Logic Standard
3.15
3.3
3.45 V
4.75
5.0
5.25 V
2 ~ 30
mA
12 ~ 30
mA
15 ~ 50
mA
25 ~ 100
mA
Option 3 = “C”
Option 3 = “S”
Option 3 = “H”
Option 3 = “P”
Option 3 = “L”
Option 3 = “C”
Option 3 = “S”
Option 3 = “H”
Option 3 = “P” or “L”
Option 3 = “C” / 3.3 V
Option 3 = “C” / 5.0 V
Option 3 = “S” / 3.3 V
Option 3 = “S” / 5.0 V
Option 3 = “H”, “P”, “L”
Option 2 = “3”
Option 2 = “5”
Option 3 = “C”
Option 3 = “S”
Option 3 = “H”
Option 3 = “P” or “L”
Enclosure (see drawing) (LxWxH) (Note 3)
20.7x13.1x7.5 max.
mm
IEC 60679-3 CO 02
Weight
5g
Packing
Palette
IEC 60286-3
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Depending on frequency and supply voltage
3. Reduced package height H = 5.1 mm max. on request
4. All combinations of options might not be available. Please consult factory
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXLE207M Rev.1
Drawing D2
Page 1(4)
ww.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]