AXIS10LN Datasheet, PDF (1/4 Pages) Advanced XTAL Products – Low Phase Noise SMD VCXO with HCMOS Output

Designed and
Manufactured
in Germany
Specification AXIS10LN
Rev.: 3 Date: 2014-04-05
Oscillator type: Low Phase Noise SMD VCXO with HCMOS Output
Parameter
min. typ. max. Unit Condition
Frequency range
Frequency stability
Initial tolerance
vs. operating temperature range
vs. supply voltage variation
vs. load change
Long term (aging) 1^st year
Long term (aging) following years
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC non-linearity
EFC input impedance
RF output
Signal waveform
Load
Rise & decay time
Symmetry (duty cycle)
Sub-harmonics
Phase noise @ 100 MHz
(Note 2)
Phase noise floor
Supply voltage V_S
Current consumption (Note 3)
10
165 MHz
ppm
±5 ppm
±5 to ±20
ppm
See tables 1 & 2
±3 ppm
±3 ppm
±3 ppm
±1 ppm
Option 2 & 3
V_S ±5%
Load ±5%
@ 40°C
@ 40°C
±40
ppm
±25
ppm
±15
ppm
0.15
3.15 V
0.25
4.75 V
Positive
±5
±10 %
100
kΩ
50 MHz ~ 90 MHz
90 MHz ~ 120 MHz
120 MHz ~ 165 MHz
Option 1 = “33”
Option 1 = “50“
HCMOS
15
pF
5 ns
40
60 %
None
@ V_S/2
-95
dBc/Hz 10 Hz
-125
dBc/Hz 100 Hz
-150
dBc/Hz 1 kHz
-155
dBc/Hz 10 kHz
-160
dBc/Hz ≥100 kHz
-160 -155 dBc/Hz @ ≥ 10 kHz
3.15
3.3
3.45 V
Option 1 = “33”
4.75
5.0
5.25 V
Option 1 = “50“
50 mA
Option 1 = “33“
30 mA
Option 1 = “50”
Enclosure (see drawing)
14.4x9.5x6.0 max.
mm
IEC 61837 CO 27
Weight
2g
Packing
Tape & Reel
IEC 60286-3
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Phase noise for other frequencies on request
3. Current consumption depends of frequency
4. All combinations of options might not be available. Please consult factory
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIS10LN Rev.3
Drawing D0
Page 1(4)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]