AXIOM95LP Datasheet, PDF (1/5 Pages) Advanced XTAL Products – VHF OCXO in Low Profile Connectorized Package

Designed and
Manufactured
in Germany
Specification AXIOM95LP
Rev.: 1 Date: 2014-04-30
Oscillator type: VHF OCXO in Low Profile Connectorized Package
Parameter
min. typ. max. Unit Condition
Frequency range
Standard frequencies
Frequency stability
Initial tolerance @ +25°C
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per day
(after 30 days operation) (Note 2)
Long term (aging) 1^st year
(after 30 days operation) (Note 2)
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC input impedance
RF output
Signal waveform
Load R_L
Output level (Note 3)
Harmonics
Spurious
Warm-up time @ +25°C
Phase Noise
Supply voltage V_S
Current consumption (steady state)
@ +25°C (Note 4)
Current consumption (warm-up)
(Note 4)
80
130 MHz
80.000/95.000/96.000
MHz
100.000/125.000/128.000
±300 ppb V_C @ centre value
Option 3 & 4
steady state
See tables 2 & 3
±10 ppb V_S ±5%
±10 ppb R_L ±10%
±10 ppb AT-Cut
±2 ppb SC-Cut
±300
±500 ppb AT-Cut
±50
±200 ppb SC-Cut
±2
±5 ppm AT-Cut
±1
ppm SC-Cut
0.25
2.5
4.75 V
Positive
100
kΩ
Sine wave
50
Ω
±10%
+3
dBm
-30 dBc
-90 dBc
3
5
Consult factory
min ∆f_final/f₀ < ±0.1 ppm
4.75
5.0
5.25 V
Option 2 = “50”
11.4
12.0
12.6 V
Option 2 = “12”
250 mA Option 2 = “50”
150 mA Option 2 = “12”
600 mA Option 2 = “50”
350 mA Option 2 = “12”
Enclosure (see drawing) (LxWxH)
54.0x40.0x13.0 max.
mm Option 1 (see Table 1)
Weight
50 g
Packing
Palette
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Lower aging on request
3. Other output level on request
4. May be higher for wide operating temperature range
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM95LP Rev.1
Drawing D0
Page 1(5)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]