AXIOM5050 Datasheet, PDF (1/4 Pages) Advanced XTAL Products – VHF Ultra-Low Phase Noise OCXO in Connectorized Package

Designed and
Manufactured
in Germany
Specification AXIOM5050
Rev.: 4 Date: 2014-04-26
Oscillator type: VHF Ultra-Low Phase Noise OCXO in Connectorized Package
Parameter
min. typ. max. Unit Condition
Frequency range
Standard frequencies
Frequency stability
Initial tolerance @ +25°C
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per day
Long term (aging) 1^st year
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC input impedance
RF output
Signal waveform
Load R_L
Output level (Note 2)
Harmonics
Spurious
Warm-up time @ +25°C
Phase noise @ 100 MHz and 120 MHz
Supply voltage V_S (Note 3)
Current consumption (steady state)
Current consumption (warm-up)
50
150 MHz
100.000/120.000
MHz
±300 ppb
Option 2 & 3
See tables 2 & 3
±10 ppb
±5 ppb
±1
±2 ppb
±100 ±200 ppb
@ V_C = 5.0 V
steady state
V_S ±5%
R_L ±5%
after 30 days operation
after 30 days operation
±1
±2
ppm
0
5.0
10.0 V
Positive
100
kΩ
Sine wave
50
Ω
±5%
+7
dBm
-30 dBc
-90 dBc
3
5
See table 1
min ∆f_final/f₀ < ±0.1 ppm
Option 1
11.4
12.0
12.6 V
300 mA @ +25°C
500 mA
Enclosure (see drawing) (LxWxH)
50.0x50.0x21.0 max.
mm
Weight
60 g
Packing
Palette
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Other output level on request
3. Other supply voltage on request
Absolute Maximum Ratings
Parameter
Supply Voltage V_S
Control Voltage V_C
Storage Temperature
min.
max. Unit
-0.5
V_S + 10% V
-0.5
15
V
-55
+125 °C
Condition
V_S to GND
V_C to GND
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM5050 Rev.4
Drawing D0
Page 1(4)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]