AXIOM260 Datasheet, PDF (1/4 Pages) Advanced XTAL Products – Low Phase Noise OCXO in Vibration-isolated Package

Designed and
Manufactured
in Germany
Specification AXIOM260
Rev.: 3 Date: 2014-04-26
Oscillator type: Low Phase Noise OCXO in Vibration-isolated Package
Parameter
min. typ. max. Unit Condition
Frequency range
Nominal frequencies
Frequency stability
Initial tolerance @ +25°C
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per day
Long term (aging) 1^st year
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC input impedance
RF output
Signal waveform
Load R_L
Output level
Harmonics
Spurious
Warm-up time @+25°C
Phase noise under rest @ 100 MHz
(Note 2)
Phase noise under random vibration
G-sensitivity (Note 4)
Supply voltage V_S
Current consumption (steady state)
Current consumption (warm-up)
Operating temperature range
60
125 MHz
100.000/120.000
MHz
±300 ppb
±300 ppb
±20 ppb
±20 ppb
±2 ppb
±200 ppb
@ V_C = 5V
V_S ±5%
R_L ±10%
after 30 days operation
after 30 days operation
±1
ppm
0
5
10 V
Positive
100
kΩ
Sine wave
50
+10
-30
-90
10
-100
-130
-155
-160
-165
Consult factory
0.1
11.4 12.0 12.6
400
800
-20
+70
Ω
dBm
dBc
dBc
min
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ppb/g
V
mA
mA
°C
±10%
∆f_final/f₀ < ±0.1 ppm
@ 10 Hz
@ 100 Hz
@ 1 kHz
@ 10 kHz
@ ≥100 kHz
(Note 3)
per axis
@ +25°C
Enclosure (see drawing) (LxWxH)
50x48x27
mm
Weight
60 g
Packing
Palette
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Better phase noise on request
3. Phase noise under random vibration depends on the vibration profile and level. Please consult factory
4. Overall G-sensitivity is a function of vibration frequency. Roll-off above 200 Hz.
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM260 Rev.3
Drawing D0
Page 1(4)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]