AXIOM175 Datasheet, PDF (1/4 Pages) Advanced XTAL Products – High Stability SMD OCXO with Sine Wave Output

Designed and
Manufactured
in Germany
Specification AXIOM175
Rev.: 2
Date: 2014-04-18
Oscillator type: High Stability SMD OCXO with Sine Wave Output
Parameter
min. typ. max. Unit Condition
Frequency range
Standard frequencies
Frequency stability
Initial tolerance @ +25°C
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per day
(after 30 days operation) (Note 2)
Long term (aging) 1^st year
(after 30 days operation) (Note 2)
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC input impedance
RF output
Signal waveform
Load R_L
Output level (Note 3)
Harmonics
Spurious
Warm-up time @ +25°C
Phase Noise
Reference voltage VREF output (Note 4)
5 ~ 150 MHz
≤ 40 MHz
> 40 MHz
Supply voltage V_S
Current consumption (steady state)
@ +25°C (Note 5)
Current consumption (warm-up)
(Note 5)
5
150 MHz
10.000/100.000/125.000 MHz
±300 ppb
Option 2 & 3
See tables 1 & 2
±10 ppb
±5 ppb
±10 ppb
±2 ppb
±300 ±500 ppb
±50 ±200 ppb
V_C @ VREF/2
steady state
V_S ±5%
R_L ±5%
AT-Cut
SC-Cut
AT-Cut
SC-Cut
±2
±5 ppm AT-Cut
±0.8
ppm SC-Cut
0 VREF/2 VREF V
Positive
100
kΩ
Sine wave
50
Ω
±5%
+7
dBm
-30 dBc
-90 dBc
3
5 min ∆f_final/f₀ < ±0.1 ppm
Consult factory
4.0
V
Option 1 = “50”
5.0
V
Option 1 = “12”
10.0
V
Option 1 = “12”
4.75
5.0
5.25 V
Option 1 = “50”
11.4 12.0 12.6 V
Option 1 = “12”
250 mA Option 1 = “50”
150 mA Option 1 = “12”
600 mA Option 1 = “50”
350 mA Option 1 = “12”
Enclosure (see drawing) (LxWxH) (Note 6)
27.8x27.8x15.5 max. mm
Weight
20 g
Packing
Palette
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Lower aging on request
3. Other output level on request
4. Other reference voltages on request
5. May be higher for wide operating temperature range
6. Lower height H available on request
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM175 Rev.2
Drawing D0
Page 1(4)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]