AXIOM170 Datasheet, PDF (1/4 Pages) Advanced XTAL Products – High Stability SMD OCXO with HCMOS Output

Designed and
Manufactured
in Germany
Specification AXIOM170
Rev.: 1
Date: 2014-04-26
Oscillator type: High Stability SMD OCXO with HCMOS Output
Parameter
min. typ. max. Unit Condition
Frequency range
Standard frequencies
Frequency stability
Initial tolerance @ +25°C
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per day
(after 30 days operation) (Note 2)
Long term (aging) 1^st year
(after 30 days operation) (Note 2)
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC input impedance
RF output
Signal waveform
Load
Symmetry (duty cycle)
Rise & decay time
Warm-up time @ +25°C
Phase Noise
Reference voltage VREF output (Note 3)
Supply voltage V_S
Current consumption (steady state)
@ +25°C (Note 4)
Current consumption (warm-up)
(Note 4)
5
40 MHz
10.000/12.800/20.000/40.000 MHz
±300 ppb
Option 2 & 3
See tables 1 & 2
±10 ppb
±5 ppb
±10 ppb
±2 ppb
±300 ±500 ppb
±50
±200 ppb
±2
±5 ppm
±0.8
ppm
0
VREF/2 VREF V
Positive
100
kΩ
HCMOS
15
pF
40
60 %
5 ns
3
5 min
Consult factory
3.0
V
4.0
V
3.15
3.3
3.45 V
4.75
5.0
5.25 V
350 mA
250 mA
900 mA
600 mA
V_C @ VREF/2
steady state
V_S ±5%
Load ±10%
AT-Cut
SC-Cut
AT-Cut
SC-Cut
AT-Cut
SC-Cut
±10%
@ V_S/2
@ 10% ~ 90% V_S
∆f_final/f₀ < ±0.1 ppm
Option 1 = “33”
Option 1 = “50”
Option 1 = “33”
Option 1 = “50”
Option 1 = “33”
Option 1 = “50”
Option 1 = “33”
Option 1 = “50”
Enclosure (see drawing) (LxWxH) (Note 5)
27.8x27.8x15.5 max.
mm
Weight
20 g
Packing
Palette
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Lower aging on request
3. Other reference voltages on request
4. May be higher for wide operating temperature range
5. Lower height H available on request
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM170 Rev.1
Drawing D0
Page 1(4)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]