AXIOM130HP Datasheet, PDF (1/4 Pages) Advanced XTAL Products – High-performance OCXO with very high frequency stability

Designed and
Manufactured
in Germany
Specification AXIOM130HP
Rev.: 2 Date: 2015-06-23
Oscillator type: High-performance OCXO with very high frequency stability
equivalent to Oscilloquartz Models OCXO 8662/8663
Parameter
min. typ. max. Unit Condition
Frequency range
Standard frequencies
Frequency stability
Initial tolerance @ +25°C
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per day (Note 2)
Long term (aging) per month (Note 2)
Long term (aging) per year (Note 2)
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage V_C
EFC slope (∆f / ∆V_C)
EFC nonlinearity
EFC input impedance
RF output (Note 3)
Signal waveform
Load R_L
Output level
Harmonics
Spurious
Warm-up time @ +25°C
Phase noise @ 10.000 MHz
Short term stability (Allan deviation)
Reference voltage VREF output (Note 4)
Supply voltage V_S (Note 5)
Current consumption (steady state)
@ +25°C
Current consumption (warm-up)
5
40
5.000 / 8.192 / 10.000 / 16.384
±100
Option 2 & 3
See tables 1 & 2
±0.3
±0.05
±0.2
±5
±30
±0.3
0
VREF/2 VREF
Positive
±5
100
Sine wave
50
+4
-30
-70
3
-95
-80
-125
-110
-145
-135
-155
-145
-160
-145
2·10^-11
10.0
11.4
12.0
12.6
22.8
24.0
25.2
200
100
500
300
MHz
MHz
ppb V_C @ VREF/2
steady state
ppb V_S ±5 %
ppb R_L ±10 %
ppb after 30 days operation
ppb after 30 days operation
ppb after 30 days operation
ppm
V
%
kΩ
Ω
±10%
dBm
dBc
dBc f_nom ±1 MHz
min ∆f_final/f₀ < ±0.1 ppm
dBc/Hz @ 1 Hz
dBc/Hz @ 10 Hz
dBc/Hz @ 100 Hz
dBc/Hz @ 1 kHz
dBc/Hz @ ≥10 kHz
τ = 0.2~10 s
V
V
Option 1 = “12”
V
Option 1 = “24”
mA Option 1 = “12”
mA Option 1 = “24”
mA Option 1 = “12”
mA Option 1 = “24”
Enclosure (see drawing) (LxWxH)
52.0x42.0x25.0 max.
mm
Weight
100 g
Packing
Palette
Notes:
1. Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
2. Lower aging on request
3. HCMOS output on request
4. Other reference voltage on request
5. Other supply voltages on request
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM130HP Rev.2
Drawing D0
Page 1(4)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]