AXE10P Datasheet, PDF (1/2 Pages) Advanced XTAL Products – PXO (Clock) with PECL Output

Specification AXE10P(E)
Issue: 01 Date: 2005-06-08
Oscillator type : PXO (Clock) with PECL Output
Parameter
Frequency range
Standard frequencies
Frequency stability
Initial tolerance
vs. temperature in operating temperature
range (steady state)
vs. supply voltage variation
vs. load change
long term (aging) per year
min. typ. max. Unit
19.440
212.5
125.000 / 155.520
-25
25
MHz
MHz
ppm
ppm
ppm
Condition
(see Note 1)
Included in “frequency
stability”
±3 ppm
±1 ppm
±3 ppm
V_S ±5%
Load ±5%
per year @ +25°C
Frequency adjustment range
Electronic Frequency Control (EFC) range
RF output
Signal waveform
Load
Rise & decay time
Symmetry (duty cycle)
Start-up time
Jitter
Supply voltage V_S
Current consumption (steady state @ +25°C)
Enable/disable function
Operating temperature range
Operable temperature range
Storage temperature range
ppm
PECL
50
Ω
1 ns
40
60 %
10 ms
1 ps
3.13 3.3 3.47 V
4.75 5.0 5.75 V
120 mA
80 mA
Not applicable
Pin2 = “LOW”: Enable
Pin2 = “HIGH”: Disable
0
+70 °C
-40
+85 °C
-45
+90 °C
-55
+105 °C
N.A.
To V_EE
20%~80% of waveform
@ 50% of waveform
r.m.s. 10 kHz ~ 20 MHz
Option I = “33”
Option I = “50”
Option I = “33”
Option I = “50”
AXE10P
AXE10PE
Option II = “070”
Option II = “485”
Enclosure (see drawing) (LxWxH)
14.8x9.8x5.5 max mm IEC 61837 CO 26(AXE10P)
CO 27 (AXE10 PE)
Weight
3 gram
Packing
Tape & reel
IEC 60286-3
ESD Sensitivity
1500
V
HBM as in IEC 61000-4-2
Notes:
1. Frequency stability = initial tolerance + temp.stability
2. Absolute Pull Range (APR) = EFC range - temperature stability - supply & load change – aging
3. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated
Ordering Code:
Model (Specification)
AXE10P
AXE10PE
Option I Option II Frequency [MHz]
50
070 155.520
GmbH & Co. KG
Wasemweg 5
D-74821 Mosbach
Germany
AXE10P
page 1(2)
www.axtal.com
fon: [phone]
fax: [phone]
E-mail: [e-mail]