RBOX103_16 Datasheet, PDF (1/2 Pages) Axiomtek Co., Ltd. – 2 power paths with terminal block and 12-48VDC

rBOX103
Robust Din-rail Fanless Embedded System
with Intel® Atom™ Processor Z510PT/
Z520PT up to 1.33 GHz, Intel® US15WPT
and 2 Isolated CAN Bus
Wireless
(3G/GPRS)
LED indicators
(power, alarm, ready/
active, COM)
2 isolated CAN 2.0 A/B
Intel® Atom™
processor Z510 PT/
Z520PT
Features
● Fanless and cableless design
● Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT
1.33 GHz
● Wide temperature operation of -40°C ~ +70°C
● 2 isolated CAN 2.0 A/B
● 2 isolated Ethernet ports
● 2 watchdog timer
● LED indicators
● 1 wireless (3G/GPRS)
● SNMP V1/V2c
● Supports one CompactFlash™, one SD card (optional)
● 2 power paths with terminal block and 12-48VDC
● Supports AXView remote monitoring software package
Front view
Isolation
CAN Bus
UL508
IP30
Fanless
Low Power Ext. Temp
Introduction
The rBOX103 din-rail fanless embedded field controller supports extra low power Intel®
Atom™ processors Z510PT and Z520PT with extended temperature range of -40°C to
+70°C for use in extreme operating environments.
To prevent ESD and over-voltage, this super compact rBOX103 is equipped with two
isolated CAN 2.0 A/B, two isolated Ethernet for offering magnetic isolation protection.
Two power paths input minimize the risk of data loss in the event of a single power
failure. rBOX103 is powered by IP30 housing, wide operating temperature range and
Safety/EMI/EMS compliance. Besides, it is also specially designed for remote control/
monitoring management applications like automatic parking lot, traffic cabinet and more.
The rBOX103 features rich expansion for communication such as CAN bus in-vehicle
network.The ready-to-run rBOX103 equipped with AXView remote monitoring software
is a total solution for facility monitoring systems, intelligent transportation systems, and
more.
Specifications
Standard Color
Construction
CPU
System Memory
System I/O Outlet
Sliver-Black
Extruded aluminum and heary-duty steel, IP30
Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT 1.33 GHz
1 x 200-pin DDR2 SO-DIMM max. up to 2 GB
Serial Port
2 x RS-232/422/485 (COM 1/2)
(isolated COM as option)
Interface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
Serial port speed up to 115.2kbps
LAN
1 x 10/100/1000Mbps Ethernet
1 x 10/100Mbps Ethernet
Magnetic isolation protection 1.5 KV
USB
2 x USB 2.0
USB power distribution control by
software
CAN
2 CAN 2.0 A/B (DB9 connector)
Meets ISO 11898 standard
331
Din-rail kit
Rear view
System I/O Outlet
Watchdog Timer
LEDs
Storage
Installation
Power Supply
Power Supply
CAN
Software control termination resistor
120 ohm
Magnetic isolation protection 2.5KV
Transmitter baud rate from 5kb/s to 1Mb/s
VGA
1 x DB15 connector
Power Input
2 x DC power input with terminal block
Alarm Contact
One relay output with current 0.5A
@30VDC
Wireless
1 x Mini Card (Full size, supports USB
only)
1 x SIM socket onboard
Supports 3G/GPRS
2 WDT
WDT 1: one step is 1 sec, 255 levels
WDT 2: one step is 250ms, 255 levels
System
Power, Alarm, Ready/Active, COM
(TXD,RXD), CAN (Act,Termination
Indicator)
Alarm
DC PWR1 or PWR2 is lost (default)
User define event
Supports 1 x CompactFlash
Supports 1 x SD card up to 32 GB (optional)
Din-rail, wall mount
2 power paths
Power Input Range 12-48VDC
Power Input Rating 12-48VDC, 1.4-0.4A
Power Protection
DC Version:
OVP (over voltage protection)
UVP (under voltage protection)
Reverse protection
Power
0.7A @ 24V, 17W
Consumption (COM 0.47A @ 36V, 17.24W
port link up)
0.36A @ 48V, 17.48W
* All specifications and photos are subject to change without notice.