English
Language : 

RBOX101-6COM_16 Datasheet, PDF (1/2 Pages) Axiomtek Co., Ltd. – Fanless and cableless design
rBOX101-6COM
Robust Din-rail Fanless Embedded System
with Intel® Atom™ Processor Z510PT/
Features
Z520PT up to 1.33 GHz, Intel® US15WPT, 6
Isolated COM and 1 Isolated DIO (4-IN/4-OUT) ● Fanless and cableless design
● Supports Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT
1.33 GHz
● Wide temperature operation of -40°C ~ +70°C
Wireless
(3G/GPRS)
LED indicators
(power, alarm, ready/
active, COM)
● 6 isolated COM ports, 1 isolation DIO (4-IN/4-OUT)
● 2 isolated Ethernet ports
● 2 watchdog timer
● LED indicators
● 1 wireless (3G/GPRS)
● SNMP V1/V2c
1 isolated DIO
(4-IN/OUT)
Intel® Atom™
processor Z510 PT/
Z520PT
● Supports one CompactFlash™, one SD card (optional)
● 2 power paths with terminal block and 12-48VDC
● Supports AXView remote monitoring software package
6 isolated COM
Front view
Isolation
Ext. Temp
IP30
UL508
Fanless
Low Power
Introduction
The rBOX101-6COM din-rail fanless embedded field controller supports extra low power
Intel® Atom™ processors Z510PT and Z520PT with extended temperature range of -40°C
to 70°C for use in extreme operating environments.
To prevent ESD and over-voltage, this super compact-size rBOX101-6COM is equipped
with six isolated RS-232/422/485, one isolated 10/100/1000Mbps Ethernet & one
isolated 10/100Mbps Ethernet and one isolated DIO port for offering magnetic isolation
protection. Two power paths input minimize the risk of data loss in the event of a
single power failure. Powered by IP30 housing, wide operating temperature range and
Safety/EMI/EMS compliance, the rBOX101-6COM is ideal for intelligent computing and
communication solutions in critical environments such as power utility, transportation
and more.
The ready-to-run rBOX101-6COM equipped with AXView remote monitoring software
is a total solution for power plant automation, facility monitoring systems, intelligent
transportation systems, and more.
Specifications
Standard Color
Construction
CPU
System Memory
System I/O Outlet
Sliver-Black
Extruded aluminum and heary-duty steel, IP30
Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT 1.33 GHz
1 x 200-pin DDR2 SO-DIMM max. up to 2 GB
Serial Port
6 x Isolated RS-232/422/485 (COM 1~6)
Interface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
Magnetic isolation protection 2KV
COM 1 & COM 2 speed up to 115.2kbps
COM 3 ~ COM 6 serial port speed up to
921.6kbps
LAN
1 x 10/100/1000Mbps Ethernet
1 x 10/100Mbps Ethernet
Magnetic isolation protection 1.5 KV
USB
2 x USB 2.0
USB power distribution control by
software
327
Din-rail kit Rear view
System I/O Outlet
Watchdog Timer
LEDs
Storage
Installation
DIO
1 x DIO (4-IN/4-OUT)
DI :
Input channels : 4, source type
Input voltage : 0 to 30VDCDigital input
levels for dry contacts :
-Logic level 0: close to GND
-Logic level 1: open
Digital input levels for wet contacts :
-Logic level 0: +10V to +24V (DI to
COM-)
-Logic level 1: +3V max.
DO :
Output channels : 4, sink type
Output current: Max. 200 mA per
channel
On-state voltage : 24VDC nominal,
open collector to 30V
Optical isolation protection 2 KV
VGA
1 x DB15 connector
Power Input
2 x DC power input with terminal block
Alarm Contact
One relay output with current 0.5A
@30VDC
Wireless
1 x Mini Card (Full size, supports
USB only)
1 x SIM socket onboard
Supports 3G/GPRS
2 WDT
WDT 1: one step is 1 sec, 255 levels
WDT 2: one step is 250ms, 255 levels
System
Power, Alarm, Ready/Active, COM
(TXD,RXD)
Alarm
DC PWR1 or PWR2 is lost (default)
User define event
Supports 1 x CompactFlashTM
Supports 1 x SD card up to 32 GB (optional)
Din-rail, wall mount
* All specifications and photos are subject to change without notice.