RBOX101-6COMATEX Datasheet, PDF (1/2 Pages) Axiomtek Co., Ltd. – ATEX Anti-Explosive Certified Robust Din-rail Fanless Embedded System

rBOX101-6COM(ATEX)
ATEX Anti-Explosive Certified Robust Din-rail
Fanless Embedded System
Features
LED indicators
(power, alarm,
ready/active, COM)
1 isolated DIO
(4-IN/4-OUT)
6 isolated COM
ATEX
Intel^® Atom™ processor
Z510 PT/ Z520PT
● ATEX Anti-Explosive Type "nA" Zone 2 Group II Certification
● Fanless and cableless design
● Supports Intel^® Atom™ processor Z510 PT 1.1 GHz or Z520 PT
1.33 GHz
● Wide temperature operation of -40°C ~ +70°C
● 6 isolated COM ports, 1 isolation DIO (4-IN/4-OUT)
● 2 isolated Ethernet
● 2 watchdog timer
● LED indicators
● SNMP V1/V2c
● Supports one CompactFlash™, one SD card (optional)
● 2 power paths with terminal block and 12-48VDC
● Supports AXView monitoring software package
Front view
EN60950-1 Isolation Extended
IP30
Temperature
UL508
ATEX _{Fanless Low Power}
Introduction
rBOX101-6COM(ATEX) din-rail fanless embedded field controller supports extra low
power Intel^® Atom™ processors Z510PT and Z520PT with extended temperature range of
-40°C to 70°C for use in extreme operating environments.
System I/O Outlet
To prevent ESD and over-voltage, this super compact-size rBOX101-6COM(ATEX) is
equipped with six isolated RS-232/422/485, one isolated 10/100/1000Mbps Ethernet
& one isolated 10/100Mbps Ethernet and one isolated DIO port for offering magnetic
isolation protection. Two power paths input minimize the risk of data loss in the event of
a single power failure. Powered by IP30 housing, wide operating temperature range and
Safety/EMI/EMS compliance, rBOX101-6COM(ATEX) is ideal for intelligent computing
and communication solutions in critical environments such as power utility, transportation
and more.
The ready-to-run rBOX101-6COM(ATEX) equipped with AXView monitoring software
is a total solution for power plant automation, facility monitoring systems, intelligent
transportation systems, and more.
Specifications
Standard Color
Construction
CPU
System Memory
System I/O Outlet
Sliver-Black
Extruded aluminum and heary-duty steel, IP30
Intel^® Atom™ processor Z510 PT 1.1 GHz or Z520 PT 1.33 GHz
1 x 200-pin DDR2 SO-DIMM max. up to 2 GB
Serial Port
6 x RS-232/422/485 (COM 1~6)
Interface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
Magnetic isolation protection 2KV
COM 1 & COM 2 speed up to 115.2kbps
COM 3 ~ COM 6 serial port speed up to
921.6kbps
LAN
1 x 10/100/1000Mbps Ethernet
1 x 10/100Mbps Ethernet
Magnetic isolation protection 1.5 KV
USB
2 x USB 2.0
USB power distribution control by
software
Watchdog Timer
LEDs
Din-rail kit _{Rear view}
DIO
1 x DIO (4-IN/4-OUT)
DI :
Input channels : 4, source type
Input voltage : 0 to 30VDCDigital input
levels for dry contacts :
-Logic level 0: close to GND
-Logic level 1: open
Digital input levels for wet contacts :
-Logic level 0: +10V to +24V (DI to
COM-)
-Logic level 1: +3V max.
DO :
Output channels : 4, sink type
Output current: Max. 200 mA per
channel
On-state voltage : 24VDC nominal,
open collector to 30V
Optical isolation protection 3 KV
VGA
1 x DB15 connector
Power Input
2 x DC power input with terminal block
Alarm Contact
One relay output with current 0.5A
@30VDC
2 WDT
WDT 1: one step is 1 sec, 255 levels
WDT 2: one step is 250ms, 255 levels
System
Power, Alarm, Ready/Active, COM
(TXD,RXD)
Alarm
DC PWR1 or PWR2 is lost (default)
User define event
321
* All specifications and photos are subject to change without notice.