RBOX101-4COM Datasheet, PDF (1/2 Pages) Axiomtek Co., Ltd. – Fanless and cableless design

rBOX101-4COM
Robust Din-rail Fanless Embedded System
with Intel^® Atom™ Processor Z510PT/
Z520PT up to 1.33 GHz, Intel^® US15WPT
Chipset and 4 Isolated COM
LED indicators
(power, alarm, ready/active, COM)
4 isolated COM
Features
● Fanless and cableless design
● Supports Intel^® Atom™ processor Z510 PT 1.1 GHz or Z520 PT
1.33 GHz
● Wide temperature operation of -40°C ~ +70°C
● 4 isolated COM ports
● 2 isolated Ethernet
● 2 watchdog timer
● LED indicators
● 1 wireless (3G/GPRS)
● SNMP V1/V2c
● Supports one CompactFlash™, one SD card (optional)
● 2 power paths with terminal block and 12-48VDC
● Supports AXView monitoring software package
Front view
EN60950-1 Isolation Extended
IP30
Temperature
Introduction
UL508
Fanless Low Power
rBOX101-4COM din-rail fanless embedded field controller supports extra low power
Intel^® Atom™ processors Z510PT and Z520PT with extended temperature range of -40°C
to 70°Cfor use in extreme operating environments.
To prevent ESD and over-voltage, this super compact-size rBOX101-4COM is equipped
with four isolated RS-232/422/485, one isolated 10/100/1000Mbps Ethernet & one
isolated 10/100Mbps Ethernet for offering magnetic isolation protection. Two power
paths input minimize the risk of data loss in the event of a single power failure. Featuring
IP30 housing, wide operating temperature range and Safety/EMI/EMS compliance,
rBOX101-4COM is ideal for intelligent computing and communication solutions in critical
environments such as power utility, transportation and more.
The ready-to-run rBOX101-4COM equipped with AXView monitoring software is a
total solution for power plant automation, facility monitoring systems, intelligent
transportation systems, and more.
Specifications
Standard Color
Construction
CPU
System Memory
System I/O Outlet
Sliver-Black
Extruded aluminum and heary-duty steel, IP30
Intel^® Atom™ processor Z510 PT 1.1 GHz or Z520 PT 1.33 GHz
1 x 200-pin DDR2 SO-DIMM max. up to 2 GB
Serial Port
4 x RS-232/422/485 (COM 1~4)
nterface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
Magnetic isolation protection 2 KV
COM 1 & COM 2 speed up to 115.2kbps
COM 3 & COM 4 serial port speed up to
921.6kbps
LAN
1 x 10/100/1000Mbps Ethernet
1 x 10/100Mbps Ethernet
Magnetic isolation protection 1.5 KV
USB
2 x USB2.0
USB power distribution control by
software
283
Din-rail kit _{Rear view}
System I/O Outlet
Watchdog Timer
LEDs
Storage
Installation
Power Supply
Operating Temperature
Storage Temperature
Humidity
VGA
1 x DB15 connector
Power Input
2 x DC power input with terminal block
Alarm Contact
One relay output with current 0.5A
@30VDC
Wireless
1 x MiniCard (Full size, supports USB
only)
1 x SIM socket onboard
Supports 3G/GPRS
2 WDT
WDT 1 : one step is 1 sec, 255 levels
WDT 2 : one step is 250ms, 255 levels
System
Power, Alarm, Ready/Active,COM
(TXD,RXD)
Alarm
DC PWR1 or PWR2 is lost (default)
User define event
Supports 1 x CompactFlash^TM
1 x SD card up to 32 GB (optional)
Din-rail, wall mount
2 power paths
Power Input Range 12-48VDC
Power Protection DC Version:
OVP (over voltage protection)
UVP (under voltage protection)
Reverse protection
Power
Consumption
(COM port link up)
With no load on 2 USB ports:
1.05A @ 12V, 12.6W
0.53A @ 24V, 12.72W
0.36A @ 36V, 12.96W
0.28A @ 48V, 13.44W
With full load on 2 USB ports:
1.48A @ 12V, 17.76W
0.74A @ 24V, 17.76W
0.50A @ 36V, 18W
0.38A @ 48V, 18.24W
-40°C ~ +70°C (-40°C ~ +158°C)
-45°C ~ +85°C (-49°C ~ +185°C)
5% ~ 95%
* All specifications and photos are subject to change without notice.