RBOX100 Datasheet, PDF (1/2 Pages) Axiomtek Co., Ltd. – Fanless and cableless design

rBOX100
Robust Din-rail Fanless Embedded System
with Intel^® Atom™ Processor Z510PT/
Z520PT up to 1.33 GHz, Intel^® US15WPT
Chipset and 1 Isolated DIO (8-IN/8-OUT)
LED indicators
(power, alarm, ready/
active, COM)
1 isolated DIO
(8-IN/8-OUT)
Features
● Fanless and cableless design
● Supports Intel^® Atom™ processor Z510 PT 1.1 GHz or Z520 PT
1.33 GHz
● Wide temperature operation of -40°C ~ +70°C
● 1 isolated DIO (8-IN/8-OUT)
● 2 isolated Ethernet
● 2 watchdog timer
● LED indicators
● SNMP V1/V2c
● Supports 1 CompactFlash^TM, 1 SD card (optional)
● 2 power paths with terminal block and 12-48VDC
● Supports AXView monitoring software package
Front view
Din-rail kit
EN60950 Extended
IP30
Temperature
Introduction
UL508
Fanless Low Power
rBOX100 din-rail fanless embedded field controller supports extra low power Intel^®
Atom^TM processors Z510PT and Z520PT with extended temperature range of -40°C to
70°C for use in extreme operating environments.
Its 8-IN/8-OUT DIO port provides users with the digital devices connection, and its
redundant Ethernet connection provides greater availability and reliability. Two power
paths input minimizes the risk of data loss in the event of a single power failure. Besides,
rBOX100 is also specifically built for rugged work environments, has met Safety Agency
requirements and passed heavy industrial EMI/EMS testing. The robust rBOX100 is
specifically built for remote control/ monitoring management applications like unmanned
control room, industrial machine, automatic parking lot, traffic cabinet and more.
The ready-to-run rBOX100 equipped with AXView monitoring software is a total solution
for power plant automation, facility monitoring systems, intelligent transportation
systems, and more.
Specifications
Standard Color
Construction
CPU
System Board
System Memory
System I/O Outlet
Sliver-Black
Extruded aluminum and heary-duty steel, IP30
Intel^® Atom^TM processor Z510 PT 1.1 GHz or Z520 PT 1.33
GHz
RM820
1 x 200-pin DDR2 SO-DIMM max. up to 2 GB
Serial Port
2 x RS-232/422/485 (COM 1/2)
(isolated COM as option)
Interface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
Serial port speed up to 115.2kbps
LAN
1 x 10/100/1000Mbps Ethernet
1 x 10/100Mbps Ethernet
Magnetic isolation protection 1.5 KV
USB
2 x USB 2.0
USB power distribution control by
software
281
Rear view
System I/O Outlet
Watchdog Timer
LEDs
Storage
Installation
Power Supply
DIO
1 x DIO (8-IN/8-OUT)
DI:
Input range : 0~30 VDC
Logic level 0 : +/- 3V max.
Logic level 1 : +/- 10V min. (COM to DI)
DO:
Max. 200 mA per channel, current sink type
24VDC normal, open collector to 30V
Optical isolation protection 3 KV
VGA
1 x DB15 connector
Power Input
2 x DC power input with terminal block
Alarm Contact
One relay output with current
0.5A @30VDC
2 WDT
WDT 1: one step is 1 sec, 255 levels
WDT 2: one step is 250ms, 255 levels
System
Power, Alarm, Ready/Active, COM
(TXD,RXD)
Alarm
DC PWR1 or PWR2 is lost (default)
User define event
Supports 1 x CompactFlash^TM
Supports 1 x SD card up to 32 GB (optional)
Din-rail, wall mount
2 power paths
Power Input Range 12-48VDC
Power
Protection
DC Version:
OVP (over voltage protection)
UVP (under voltage protection)
Reverse protection
Power
Consumption
With no load on 2 USB ports:
0.77A @ 12V, 9.24W
0.39A @ 24V, 9.36W
0.29A @ 36V, 10.44W
0.20A @ 48V, 9.6W
With full load on 2 USB ports:
1.25A @ 12V, 15W
0.62A @ 24V, 14.88W
0.42A @ 36V, 15.12W
0.32A @ 48V, 15.36W
* All specifications and photos are subject to change without notice.