IFB122 Datasheet, PDF (1/2 Pages) Axiomtek Co., Ltd. – RISC-based (i.MX 6UltraLite) processor 528 MHz

IFB122 ^NEW
Robust RISC-based DIN-rail Fanless Embedded System with i.MX 6UL
Processor 2 COM, 2 LANs and DIO (2-IN/1-OUT)
Features
● RISC-based (i.MX 6UltraLite) processor 528 MHz
● 256MB DDR3 SDRAM onboard
● 4GB eMMC flash onboard
● 1 Wireless (Wi-Fi or 3G/4G)
● 2 digital inputs and 1 digital output
● 9~48 VDC wide range power input with terminal block
● Embedded embedded Linux operating system (Yocto)
● Fanless design
● Wide operating temperature range from -40°C to +70°C
Reset button
2 x LAN
LED for system status
LED for user
programming
2 x COM
i.MX6UL-2 Ext. Temp
IP30
Fanless Low Power
Introduction
The IFB122 cost-effective DIN-rail fanless embedded system utilizes the low power RISC-
based (i.MX6UL) processor and is designed to withstand temperatures ranging from
-40°C to +70°C for using in extreme operating environment and industrial automation
applications.
The IFB122 features two RS-232/422/485 serial ports, dual LANs, two digital input
channels, one digital output channel, LED for user programming and one eMMC onboard
4 GB. Two power paths input minimize the risk of data loss in the event of a single power
failure. Its vertical DIN-rail form factor makes it easy to install the system in a small
cabinet. The ready-to-run IFB122 is specially designed for remote control/monitoring
management applications like unmanned control room, industrial machine, automatic
parking lot, traffic cabinet and more.
Front view
1 DIO ( 2-IN/1-OUT) & Console
Console PIN
DI PIN Relay PIN
DO PIN
Bottom
Antenna 2
Antenna 1
Specifications
Construction
CPU
System Memory
System I/O Outlet
Extruded aluminum and heavy-duty steel, IP30
Freescale i.MX 6UL-2 processor, ARM® Cortex®-A7 @ 528 MHz
1 x DDR3-1600 onboard, 256 MB
Serial Port
2 x RS-232/422/485
LAN
2 x 10/100 Mbps Ethernet
Magnetic isolation protection 1.5KV
Relay
1 x Relay
USB
1 x USB 2.0
DIO
1 x DIO (2-IN/1-OUT)
DI: Wet/Dry
DO: Wet
DI:
Input channels: 2 source type
Input voltage: 0 to 30 VDC digital input
levels for dry contacts:
-Logic level 0: close to GND
-Logic level 1: open
Digital input levels for wet contacts:
-Logic level 0: Close to GND
-Logic level 1: +0.7~+30 V max.
DO:
Output channels: 1, sink type
Output current: max. 200 mA per
channel
On-state voltage: 24 VDC nominal, open
Console Port
Yes
For user setting with debug
EEPROM
1 x EEPPROM (2 Kb)
Wireless
1 x PCI Express Mini Card socket
1 x SIM card socket
Rear view
USB port Power port
Top view
Watchdog Timer
LEDs
Storage
Installation
Power Supply
Operating Temperature
Storage Temperature
Humidity
Vibration Endurance
Dimensions
Weight (net/gross)
Installation
OS Linux
Certificate
WDT 1: 0.5 to 128 seconds with a time resolution of 0.5 seconds
1 x LED for power status
1 x LED for reset status
4 x LED (programing by client)
1 x eMMC 4GB flash onboard
DIN-rail
9-48 VDC power input range
-40°C ~ +70°C (-40°F ~ +158°F)
-45°C ~ +85°C (-49°F ~ +185°F)
10% ~ 95%
2G @5~500MHz, amplitude 0.35ms
31 mm (1.22") (W) x 100 mm (3.94") (D) x 125 mm (4.92") (H)
0.3 kg (0.66 lb)/0.44 kg (0.97 lb)
DIN-rail, wall mount
Toolchain/Cross compiler: Yocto
Kernel: 3.14.52
(with NXP and Axiomtek hardware modified patch)
FCC Part 15
Heavy Industrial CE
363
* All specifications and photos are subject to change without notice.