ICON-101CU Datasheet, PDF (1/2 Pages) Axiomtek Co., Ltd. – 1-port CAN to USB Industrial Converter

iCON-101CU
1-port CAN to USB Industrial Converter
(-40°C ~ +70°C)
Features
● Full compliance with USB 1.1/2.0 (fully speed)
● Full compliance with CAN 2.0A and CAN 2.0B
● D-sub DB9 CAN port supports 3KV isolation
● Easily setup to CAN terminator by software configuring
● CAN transmission speed up to 1Mbps
● Powered by the USB bus
● USB type B connector Complies with Class 1, DIV II
minimum withdrawal requirement of 15N
● Provides DIN-Rail mounting, Status LED indicators
● Driver supports Windows Server 2008; 2003/Vista/2000/XP/
7 and Linux OS
● -40°C ~ +70°C wide temperature operating suitable for
industrial automation and power automation field applications
Ext. Temp
Introduction
The CAN (Controller Area Network) is a serial bus system and is usually used in
structuring intelligent industrial device networks and building smart automatic control
systems. The iCON-101CU is a cost-efficient industrial converter for pairs to PC using
the standard USB interface. It supports CAN monitor tool and displays the CAN message
received in Decimal or HEX mode. This converter shows the time stamp of each receiving
message. The GUI management program and programming guide both are ready for use.
The CAN host, monitor or HMI can access & control CAN device through iCON-101CU.
Operating systems support includes Windows^® 98/ME/2000/XP.
Specifications
CAN Interface
Connector
Isolation
Receive Buffer
NVRAM
Max Data Flow
Support Protocol
Terminator Resistor
Baud Rate
9-pin male D-Sub
3 KVrms for DC-DC and photocoupler
1000 data frames
64Kbyte for users define
10000 fps (CAN bus)
CAN 2.0A/2.0B
Software configurable
5k,10k, 20k, 40k, 50k, 80k, 100k,125k, 200k, 250k, 400k,
500k, 600k, 800k ,1Mbps and user defined
USB Interface
Support Protocol
USB 1.1/2.0
Connector
USB type B
Receiver Buffer
1000 data frames
Power
Power Consumption
0.7W max.
LED
Power/firmware updating, CAN TX/RCV, CAN status for normal and error, USB TX/RCV,
terminator status
OS Driver Support
Windows^® Server 2008; 2003/Vista/2000/XP/7 and Linux OS
Mechanical
Casing
Aluminum case
Dimension
70 mm (W) x 110 mm (D) x 30 mm (H)
(2.75" (W) x 4.33" (D) x 1.18" (H))
Weight
0.25 kg (0.55 lb)
Installation
DIN-rail and panel mount
Environment
Operating Temperature -40°C to +70°C (-40°F to +167°F)
Storage Temperature
-40°C to +85°C (-40°F to 185°F)
Humidity
5% ~ 95% (non-condensing)
Emission Compliance CE class A, FCC class A
473
* All specifications and photos are subject to change without notice.