9159 Datasheet, PDF (58/63 Pages) Alpha Wire – Customer Specification

SSL - Discrete Wire IDC
Series 9177
The 917X series of surface mount Insulation Displacement Connectors (IDC)
were developed to meet the harsh automotive and industrial market
applications for connecting individual wires directly to a PCB ranging from 14
AWG to 28 AWG. This industry proven contact system has been tested to
automotive levels of shock, vibration, and temperature cycling to prove their
reliability and robustness. The simplicity of inserting a wire into the connector
with a small tool allows a wide range of devices to be connected to the PCB
without soldering. In SSL applications specifically, these connectors are used to
bring power and signal onto the PCB or are used to daisy chain multiple boards
together in a long string. While the IDC contact provides a gas-tight connection
to conductor of the wire, the housing has been designed to grab the insulation
of the wire to provide a positive strain relief even in the harshest conditions. In
case of repair, the wires can be removed and replace up to three times.
The 9177 series accepts 14 AWG to 20 AWG wires with an insulation diameter
ranging from 2.75mm to 4.25mm. These dual contact connectors support a
15 amp current rating with two large SMT solder tails per wire to provide
maximum stability on the PCB. Available in 1p-3p configuration, these
connectors can be end stackable for higher pin counts.
APPLICATIONS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• Application Notes: refer to 201-01-124
FEATURES AND BENEFITS
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Connector housing captures the wire insulation for positive strain relief
• Tested to automotive levels on shock, vibration and temperature cycling for
reliability
• Low and high volume assembly tools to match production volumes
• Reduced total applied cost versus solder or crimp processes
• High temperature insulator capable to 260ºC reflow soldering processes
ELECTRICAL
• Current Rating: 15 Amp / Contact
• Voltage Rating: 600 VAC
HOW TO ORDER
00 9177
00X
ENVIRONMENTAL
• Operating Temperature:
-40ºC to +125ºC
00X
MECHANICAL
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
X
06
Prefix
Series
Number of Ways
Code
No of
Ways
Details
001 1 Page 52
002 2 Page 53
003 3 Page 54
Code
001
012
022
033
Wire Gauge Size
Accepted
Wire Gauge
14 AWG
16 AWG
18 AWG
20 AWG
Wire
Insulation
Ø 4.25
Ø 3.50
Ø 3.50
Ø 2.75
Insulator Color
Code Color Application
0 Black Industrial
1 White Lighting
Plating
Option
06 = Pure Tin
all over
Certification: UL File #E320991
56