05041A820KA79A Datasheet, PDF (40/48 Pages) AVX Corporation – Multilayer Ceramic Chip Capacitor

Punched Carrier Configuration
8 & 12 mm Tape Only
8 & 12 mm Punched Tape
Metric Dimensions Will Govern
CONSTANT DIMENSIONS
Tape Size
8mm
and
12mm
D₀
1.5
+0.1
-0.0
(.059
) ^+.004
-.000
E
P₀
P₂
1.75 ± 0.10 4.0 ± 0.10 2.0 ± 0.05
(.069 ± .004) (.157 ± .004) (.079 ± .002)
T₁
0.10
(.004)
Max.
VARIABLE DIMENSIONS
Tape Size
8mm
P₁
4.0 ± 0.10
(.157 ± .004)
F
3.5 ± 0.05
(.138 ± .002)
W
8.0
+0.3
-0.1
(.315
+.012
-.004
)
G₁
0.75
(.030)
Min.
G₂
0.75
(.030)
Min.
R MIN.
25 (.984)
See Note 2
A₀ B₀
See Note 1
T
See Note 3
12mm
8mm
1/2 Pitch
4.0 ± .010
(.157 ± .004)
2.0 ± 0.10
(.079 ± .004)
5.5 ± 0.05
(.217 ± .002)
3.5 ± 0.05
(.138 ± .002)
12.0 ± 0.3
(.472 ± .012)
8.0
+0.3
-0.1
(.315
+.012
-.004
)
12mm
Double
Pitch
8.0 ± 0.10
(.315 ± .004)
5.5 ± 0.05
(.217 ± .002)
12.0 ± 0.3
(.472 ± .012)
NOTES:
1. A0, B0, and T are determined by the max. dimensions to the ends of the terminals extending from the component body and/or the body dimensions of the component. The
clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A0, B0, and T) must be within 0.05 mm (.002) min. and 0.50 mm
(.020) max. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20 degrees (see sketches A & B).
2. Tape with components shall pass around radius “R” without damage.
3. 1.1 mm (.043) Base Tape and 1.6 mm (.063) Max. for Non-Paper Base Compositions.
Bar Code Labeling Standard
AVX bar code labeling is available and follows latest version of EIA-556-A.
38