04023J2R3BBWTR Datasheet, PDF (20/20 Pages) AVX Corporation – Thin-Film RF/Microwave Capacitors

Accu-F^®/Accu-P^®
Automatic Insertion Packaging
TAPE & REEL
All tape and reel specifications are in compliance with EIA 481-1-A.
(equivalent to IEC 286 part 3).
• 8mm carrier
• Reeled quantities: Reels of 3,000 per 7" reel or 10,000 pieces per 13" reel
0201 and 0402 = 5,000 pieces per 7" reel and 20,000 pieces per 13" reel
1 _REEL
DIMENSIONS: millimeters (inches)
A⁽¹⁾
180±1.0
(7.087±0.039)
B
1.5 min.
(0.059 min.)
C
13±0.2
(0.512 ± 0.008)
D
20.2 min.
(0.795 min.)
E
50 min.
(1.969 min.)
F
9.6±1.5
(0.370 ± 0.050)
G
14.4 max.
(0.567 max.)
Metric dimensions will govern.
Inch measurements rounded and for reference only.
(1) 330mm (13 inch) reels are available.
G MAX.
B*
A
D*
C
E
FULL RADIUS
*DRIVE SPOKES OPTIONAL
F
IF USED, ASTERISKED
DIMENSIONS APPLY.
CARRIER
DIMENSIONS: millimeters (inches)
A
8.0 ± 0.3
(0.315 ± 0.012)
B
3.5 ± 0.05
(0.138 ± 0.002)
C
1.75±0.1
(0.069 ± 0.004)
D
2.0 ± 0.05
(0.079 ± 0.002)
NOTE: The nominal dimensions of the component compartment (W,L) are derived from the component size.
E
4.0 ± 0.1
(0.157 ± 0.004)
F
1.5 +0.1
-0.0
(0.059 ) +0.004
-0.000
10 PITCHES
E
CUMULATIVE
TOLERANCE ON
F
D
TAPE ±0.2
TOP
TAPE
C
W
BA
L
P
DIRECTION OF FEED
P = 4mm except 0201 and 0402 where P = 2mm
CENTER LINES
OF CAVITY
NOTE: AVX reserves the right to change the information published herein without notice.
24