UQCB7A100JATME Datasheet, PDF (2/13 Pages) AVX Corporation – Microwave MLC`s UQ Series High Q Ultra Low ESR MLC

Microwave MLC’s
UQ Series High Q Ultra Low ESR MLC
ELECTRICAL SPECIFICATIONS
Temperature Coefficient (TCC)
Capacitance Range
Operating Temperature
Quality Factor (Q)
Insulation Resistance (IR)
Working Voltage (WVDC)
Dielectric Withstanding Voltage (DWV)
Aging Effects
Piezoelectric Effects
Capacitance Drift
Temperature Characteristic Code A
(A) 0 ± 30 PPM/ºC
(A) 0.1 pF to 1000 pF
0.1 pF to 1000 pF: from -55ºC to +125ºC
Greater than 2,000 at 1 MHz
0.1 pF to 1000 pF
10⁵ Megohms min. @ 25ºC at rated WVDC
10⁴ Megohms min. @ 125ºC at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
None
None
± (0.02% or 0.02 pF), whichever is greater
ENVIRONMENTAL CHARACTERISTICS
AVX UQ will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123
Themal Shock
Moisture Resistance
Low Voltage Humidity
Life Test
Shock
Vibration
Immersion
Salt Spray
Solderability
Terminal Strength
Temperature Cycling
Barometric Pressure
6
Resistance to Solder Heat
Mil-STD-202, Method 107, Condition A
Mil-STD-202, Method 106
Mil-STD-202, Method 103, condition A, with 1.5 VDC
applied while subjected to an environment of 85ºC with
85% relative humidity for 240 hours
Mil-STD-202, Method 108, for 2000 hours at 125ºC
200% WVDC
Mil-STD-202, Method 213, Condition J
Mil-STD-202, Method 204, Condition B
Mil-STD-202, Method 104, Condition B
Mil-STD-202, Method 101, Condition B
Mil-STD-202, Method 208
Mil-STD-202, Method 211
Mil-STD-202, Method 102, Condition C
Mil-STD-202, Method 105, Condition B
Mil-STD-202, Method 210, Condition C
94