5NR102KADLH Datasheet, PDF (2/9 Pages) AVX Corporation – Disc Ceramic Capacitors Professional Ceramic Capacitors - Class I, II and III

Disc Ceramic Capacitors
General Specifications - Class III Professional
DIELECTRIC - CLASS III
A thin dielectric layer is grown on a disc of conductive
ceramic. Very large capacitances can be obtained due to
reduced thickness of this barrier layer and its inherently
high dielectric constant. Due its small dimensions, they are a
less expensive replacement of multilayer ceramic or poly-
ester capacitors.
DIMENSIONS
Digit 9
of P.N.
(ø)
D±2
(0.079)
A
4.0 (0.157)
B
5.0 (0.197)
C
6.0 (0.236)
D
7.0 (0.276)
E
8.0 (0.315)
F
9.0 (0.354)
G
10.0 (0.394)
H
11.0 (0.433)
J
13.0 (0.512)
K
15.0 (0.591)
(E), (X), (W): upon request
millimeters (inches)
T max.
Available
Lead Spacing
3.0 (0.118)
3.0 (0.118)
3.0 (0.118)
3.0 (0.118)
3.0 (0.118)
3.0 (0.118)
3.0 (0.118)
3.0 (0.118)
3.5 (0.138)
4.0 (0.157)
A,B,D,E,O,R
A,B,D,E,O,R,X
A,B,C,D,E,O,R,X
A,B,C,D,E,O,R,X
A,B,C,D,E,O,R,X
A,B,C,E,O,R,X
A,B,C,E,O,R,X
A,B,C,E,O,R,W
B,C,R,W
B,C,R,W
Lead Spacing
F
2.5 (0.100)
5 (0.200)
6 (0.250)
7.5 (0.300)
10 (0.400)
PERFORMANCE CHARACTERISTICS CLASS III
Measured at
Dissipation
Factor
Capacitance
Tolerance
Climatic
Category
Insulation
Resistance
@ V_R
Dielectric Strength
NOTE: Charging
current limited
to 50 mA
Operating
Temperature
Range (ºC)
Y5P
Y5U
Y5V
Between
leads
Body
insulation
1.0 kHz / 0.1 Vrms / 25ºC
C_R ≤ 22 nF → Y5V, Y5U ≤ 7.5%
C_R > 22 nF → Y5V, Y5P ≤ 5.0%
Y5P → ±20% / -20 +50%
Y5U → ±20% / -20 +80%
Y5V → ±20% / -20 +80%
55 / 085 / 56
≥12 MΩ
4.7 nF...100 nF → ≥ 10 MΩ
200 nF → ≥ 1 MΩ
≥ 100 MΩ
Vt = 1.25 V_R
V_R = 25V Vt = 100V (DC)
V_R = 50V Vt = 150V (DC)
-55... +125 Epoxy Coated
Note: Damp Heat Steady State: 90... 95% R.H. 40ºC / 21 days. No voltage to be applied.
Ø = 0.6 ± 0.1
(0.024) (0.004)
Preferred lead spacing
F = 5 (0.197)
millimeters (inches)
Digit 8 of P.N.
D
—
A
O
E
X
B
R
C
W
26