X2B2020RFRFT Datasheet, PDF (1/4 Pages) AVX Corporation – MLOTM RF-RF SMT Crossover

MLO^TM RF-RF SMT Crossover
GENERAL DESCRIPTION
The MLO^TM SMT RF-RF Crossover is a very low profile crossover that intersects an
RF and RF circuit trace in an SMT package. The RF-RF Crossover is a low cost
solution for applications where a critical RF circuit trace intersects a RF circuit
precluding the need for an expensive multilayer printed circuit board. The SMT
package can support frequencies up to 6 GHz. MLO^TM crossovers have been
subjected to JEDEC reliability standards and 100% electrically tested. The RF-RF
crossovers are available in NiSn.
FEATURES
• DC – 6.0 GHz
• RF – RF Crossover
• Low Loss
• High Isolation
• Surface Mountable
• Tape and Reel
• 100% Tested
APPLICATIONS
• Mobile communications
• GPS
• Vehicle location systems
• Wireless LAN’s
LAND GRID ARRAY
ADVANTAGES
• Inherent Low Profile
• Excellent Solderability
• Low Parasitics
• Better Heat Dissipation
HOW TO ORDER
X2B 2020 RFRF
T
Series
Size
Type
Packaging
T = 1000pcs T&R
T/250 = 250pcs T&R
B = Bulk
TOP VIEW
Frequency
(GHz)
DC -2.5
2.5 – 4.0
4.0 – 6.0
Port
Impedance
(ohms)
50
50
50
Ins.
Loss
(dB max)
0.05
0.10
0.15
Return Loss
(dB min)
20
18
10
Isolation
(dB min)
50
30
20
Power
(Watts)
30
19
9
* Specification based on performance of component assembled properly on printed circuit board with 50Ω nominal impedance.
θJC
(ºC /Watts)
150
150
150
Operating
Temperature
(ºC)
-55 to +85
-55 to +85
-55 to +85
QUALITY INSPECTION
Finished parts are 100% tested for electrical
parameters and visual characteristics.
TERMINATION
NiSn compatible with automatic soldering
technologies: Pb free reflow, wave soldering, vapor
phase and manual.
OPERATING
TEMPERATURE
- 55ºC to +85ºC
1