GX0S_15 Datasheet, PDF (1/2 Pages) AVX Corporation – Ultra Broad Band Capacitor

GX0S Series
Ultra Broad Band Capacitor
ADVANTAGES
• Ultra-Broadband performance
• Ultra-Low Insertion Loss
• Excellent Return Loss
APPLICATIONS
• Semi-Conductor Data
Communications Customers
• Receiver Optical Sub-Assemblies
• Transimpedance Amplifier
Customers
• Test Equipment Manufactures
The GX0S Series was developed to address DC Blocking issues
from ~16KHz (-3dB roll-off) to 40GHz and was designed
specifically for mounting on strip lines with widths less than
20mils. In most applications, insertion loss (as shown below) will
typically fall in the range of 0.4dB. Insertion loss at frequencies
higher than 40GHz will be in part dependent on installation
parameters. These devices utilize AVX’s patented precision thin
film termination process and are especially well suited for high
volume solder assembly.
Both Ni/Sn and Ni/Au terminations are available to cover a wide
range of attachment processes.
Au terminated units are wire bondable. Users, therefore, may find
these devices useful in bypass applications when wire bonding is
a necessary part of the manufacturing process.
GX0S products (like all GX Series parts) are RoHS compliant.
More information can be obtained by contacting the factory or
your local AVX representative.
GX0S Series – Insertion Loss (S21)
0.0
GX0S Series – Return Loss (S11)
0
-0.5
-1.0
-1.5
-2.0
-2.5
0
(Typical)
5
10
15
20
25
30
35
40
Frequency (GHz)
-10
-20
-30
-40
-50
-60
0
(Typical)
5
10
15
20
25
30
35
40
Frequency (GHz)
Test Parameters:
All testing done on 10-mil thick Rogers R03006 Microstrip board, with device under test subtending a 10 mil gap in a
13.4 mil wide center trace (nominal 50 Ohm characteristic impedance)
MECHANICAL SPECIFICATIONS
8
Figure 1
0.13 ± 0.05
(0.005 ± 0.002)
0
0.38 ± 0.05
(0.015 ± 0.002)
-8
-15
0.33 ± 0.05
(0.013 ± 0.002)
0.86 ± 0.05
(0.034 ± 0.002)
-23
-30
-75 -50 -25
0
25
50
75
Temperature (ºC)
100 125 150
18