CYR10 Datasheet, PDF (1/2 Pages) AVX Corporation – Glass Capacitors CYR10, 15 (Established Reliability) M23269/01, 02 (QPL to MIL-PRF-23269)

Glass Capacitors
CYR10, 15 (Established Reliability)
M23269/01, 02 (QPL to MIL-PRF-23269)
FAILURE RATE LEVELS M AND S
APPLICATIONS
These precision glass dielectric capacitors are QPL to Established
Reliability specification MIL-PRF-23269. Fused monolithic construc-
tion provides excellent electrical performance, environmental immu-
nity, stability and retraceability. These capacitors have axial leads.
JCY6E
151JM
CYR10
M23269J
02-3042
AVX
CYR15
PERFORMANCE CHARACTERISTICS
Temperature Coefficient: +140 ±25 ppm/°C from
-55°C to +125°C. TC of all units will track and retrace to with-
in ±5 ppm.
Life: At rated conditions (100% rated voltage, 125°C),
capacitance change is less than:
±0.5% after 2,000 hours
±2.0% after 30,000 hours
At accelerated conditions (150% rated voltage, 125°C),
capacitance change is less than:
±0.5% after 2,000 hours
±2.0% after 6,000 hours
Insulation Resistance: A minimum of 100,000 megohms at
25°C and 10,000 megohms at 125°C.
Voltage/Temperature Rating: Voltage ratings are shown in
the part number tables. The operating temperature range is
-55°C to +125°C.
Radiation Resistance: The unique materials and construc-
tion techniques involved with glass capacitors make them
ideal for use in radiation environments. After a total dose
of nearly 10⁸ rads (H₂O) glass capacitors exhibit only a
minor change in capacitance (≤.5%) and an 8% change in
dissipation factor. Furthermore, glass capacitors can operate
in fast neutron flux environments of 10¹⁵ N cm^-2sec^-1 and
experience little or no damage in component parameters.
Voltage Coefficient: Zero.
28.58
(1.125)
L
Min.
W
T
DIMENSIONS:
Case
Size
L
W
CYR10
CYR15
8.74 ± 1.19
(0.344 ± 0.047)
11.91 ± 1.19
(0.469 ± 0.047)
4.37 ± .79
(0.172 ± 0.031)
6.76 ± .79
(0.266 ± 0.031)
millimeters (inches)
Lead Dia.
T
+0.1(+0.004)
-0.03(±0.001)
1.98 ± .79
(0.078 ± 0.031)
.51
(0.020)
2.77 ± 1.19
(0.109 ± 0.047)
.51
(0.020)
Note: Standard leads are solder-coated Dumet.
Additional performance details are given in the AVX
“Performance Characteristics of Multilayer Glass Dielectric
Capacitors” technical paper.
14