CY06 Datasheet, PDF (1/2 Pages) AVX Corporation – Glass Capacitors CY06, 07, 08 (QPL to MIL-C-11272/13/14/15)

Glass Capacitors
CY06, 07, 08 (QPL to MIL-C-11272/13/14/15)
APPLICATIONS
These precision miniature glass capacitors, AVX style CY0,
meet or exceed all requirements of MIL-C-11272.
Constructed of a fused monolithic capacitive element in a
rectangular case with gold-plated radial Dumet leads, this
series permits high packaging efficiency for printed circuit
applications where extremely stable, low-loss capacitors
are required.
PERFORMANCE CHARACTERISTICS
Tolerance: Available tolerances for each value of capaci-
tance are shown in the ordering information table. For codes,
refer to the Part Numbers paragraph.
Temperature Coefficient: +140 ±25 ppm/°C at 100kHz.
TC will track and retrace to within ±5 ppm. Capacitance drift
is less than 0.1% or 0.1pF, whichever is greater.
Voltage Coefficient: Zero.
Losses: Extremely low, and remain relatively low at elevated
temperatures. Dissipation factor at 1kHz and 25°C is less
than 0.001 for values greater than 100pF and less than
0.002 for values of 100pF and below.
Life: After 2,000 hours at 125°C with 150% of rated voltage
applied, capacitance change is less than 0.5% or 0.5 pF;
dissipation factor is less than 0.0025 for values above 100
pF and less than 0.0045 for values of 100 pF and below.
Insulation Resistance: Greater than 100,000 megohms at
25°C; greater than 10,000 megohms at 125°C.
Voltage/Temperature Rating: 300 WVDC over the
temperature range of -55°C to +125°C with no derating
required.
Additional performance details are given in the AVX
“Performance Characteristics of Multilayer Glass Dielectric
Capacitors” technical paper.
AVX
CY06C
786C
AVX
CY07C
821F
AVX
CY08C
202J
CY06
CY07
L
W
CY08
T
31.75
(1.250)
Min.
S
1.27 ±0.51
(.050 ±.020)
Leads on centerline
within ±0.51 (±.020)
DIMENSIONS:
millimeters (inches)
Case
Size
CY06
CY07
CY08
L
±0.13
(±0.005)
7.62
(0.300)
7.62
(0.300)
12.70
(0.500)
W
±0.25
(±0.010)
5.08
(0.200)
7.62
(0.300)
7.62
(0.300)
T
±0.13
(±0.005)
2.92
(0.115)
2.92
(0.115)
2.92
(0.115)
S
±0.51
(±0.020)
5.08
(0.200)
5.08
(0.200)
10.16
(0.400)
Weight
(Grams)
.3 – .4
.4 – .5
.7 – .8
Note: All leads are 24 AWG, 0.51 ± .05 (0.020 ± 0.002) diameter. Leads are
solderable and weldable gold-plated Dumet, per MIL-STD-1276, Type D.
10