CL057K0682 Datasheet, PDF (1/4 Pages) AVX Corporation – High Surge Voltage SMD Film Capacitors

Film Chip Capacitors
High Surge Voltage SMD Film Capacitors – CL Series
APPLICATIONS
This new version of our High Voltage SMD range has been
developed to withstand high line surges common in telecom
application.
These capacitors meet the telecom lightning strike protection
standards.
GENERAL DESCRIPTION
Film chip capacitor using a naked and stacked construction
with metallized Polyethylene Naphtalate film (PEN) Usage of a
multitrack technology results to an equivalent serial construc-
tion which gives better high voltage surge handling capability.
ADVANTAGES
• Surge Voltage up to 1500V (10/700 μs)
• Self healing
• Safe open failure mode
• Low ESR
• Surface Mount (IR/Vapor reflow) solution
Outer Layer
Termination Plating :
100% matte Sn
Ni Barrier Under
Termination
Silver Epoxy
Resin
Brass
Active Layers : PEN dielectric
PERFORMANCE CHARACTERISTICS
Climatic Category
Capacitance Range
Tolerance on C_R
Nominal Voltages
Test Voltage
Soldering methods
Tangent of Loss Angle at 1kHz (DF)
Insulation resistance minimum: IR
Temperature range
55/125/56
6.8nF to 33nF
±5%, ±10%
630Vdc
1500V (10/700μ sec.)
IR or vapor phase reflow (not suitable for wave soldering)
< 100 x 10^-4
for C ≤ 0.33μF IR > 1000 MΩ at 20°C
for 1 min.charge at 100VDC
-55°C to 125°C with voltage derating of 1.25%/ºC between 105ºC and 125ºC
092515
47