709177001691006 Datasheet, PDF (1/5 Pages) AVX Corporation – Single Thru Hole IDC Contact

Single Thru Hole IDC Contact
12-18 AWG: WTB
9177-600
INTER_CONNECT
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG
AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology
spread to multiple wire gauges and multiple configurations; standard connectors,
capped connectors and single contacts. All of which addresses specific application or
cost parameters set forth by our customer in demanding industrial, transportation or
commercial applications. The heart of the IDC connector is the true “gas tight” WTB
termination that is achieved once the wire is inserted between the dual phosphor bronze
contact tines. These opposing tines provide enough spring characteristics to allow the
termination to remain stable over extreme levels of temperature, shock and vibration.
The new 9177-600 family of contacts incorporates all of the above mentioned
capabilities. From low cost single contacts to fully integrated capped contacts. The
unique feature of the 600 series is the fact that it was developed for Plated Through Hole
(PTH) termination to the PCB. This addresses the rugged power type boards that have
to handle larger wire gauges up to 12AWG and 15 Amps per contact of current. The PTH
option provides robust PCB attachment and high current capabilities to replace older
technology connectors or in most cases soldering stripped wires directly to the PCB.
APPLICATIONS
• Industrial pumps, motors and driver boards
• Solar and alternative energy products
• Commercial electrical equipment
• Reference Product Specification & application
notes 201-01-141/142
FEATURES AND BENEFITS
• IDC contact provides a “gas tight” wire termination to the PCB to meet
harsh industrial environments
• Simple, robust design offers a high performance solution to hand
soldering large gauge wires to a PCB
• A single contact an handle up to 15A for high current applications with
wire replacement up to 3 times
• The versatile family of IDC contact can accept 12-18AWG of stranded
wires and can be tested for compliance with solid wires
ELECTRICAL
• Current Rating: 15A
• Voltage Rating: 600 VAC
ENVIRONMENTAL
• Operating Temperature:
-40ºC to +125ºC
HOW TO ORDER – CONTACT OPTIONS
70
9177
001
6XX
MECHANICAL
• Insulator Material: Nylon 46, UL94VO
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: Wires can be replaced up to 3 time
006
Prefix
70 = Contact
Series
Number of Ways
Code
No of
Ways
Details
001 1 Page 2
Wire Gauge Size
Code
691
601
612
622
Accepted
Wire Gauge
12 AWG Solid or Stranded
14 AWG Solid or Stranded
16 AWG Solid or Stranded
18 AWG Solid or Stranded
HOW TO ORDER – CAP OPTIONS
60 9177
001
6XX
Plating
Option
006 = Pure Tin
all over
X
XX
Prefix
60 = Cap
Series
Number of Ways
Code
001
No of
Ways
1
Details
Pages
4-5
Wire Insulation Diameter
Code
627
635
642
Wire Insulation
(AWG)
Ø 2.10 - 2.75
Ø 2.75 - 3.50
Ø 3.50 - 4.25
Diameter
“A”
2.75
3.50
4.25
Color Options
Code Color Application
0 Black Special Order
1 White Standard
Assembly Options
Code Description
00 Through Wire
99 With Stop
1