5WF103MECAI Datasheet, PDF (1/2 Pages) AVX Corporation – General Specifications - Class III Semi Conducting

Disc Ceramic Capacitors
General Specifications - Class III Semi Conducting
DIELECTRIC - CLASS III
A thin dielectric layer is grown on a disc of conductive
ceramic. Very large capacitances can be obtained due to
reduced thickness of this barrier layer and its inherently
high dielectric constant. Due to its small dimensions, they
are a less expensive replacement of multilayer ceramic or
polyester capacitors. An equivalent circuit is shown below:
Meets IEC 324 (1970).
HOW TO ORDER
5Z
H
104
Z
A
C
A
A
Product Code
Voltage
Capacitance
Tolerance
Lead
Forming
Capacitor
Diameter
Finishing
Packaging
PERFORMANCE CHARACTERISTICS CLASS III
Measured at
Dissipation
Factor (%)
Tolerance
Insulation
Resistance
(IR)
Dielectric Strength
NOTE: Charging
current limited
to 50 mA
Operating
Temperature
Range (ºC)
Climate
Category
Y5P
Y5U
Y5V
Between
leads
Body
insulation
1.0 kHz / 0.1 Vrms / 25ºC
C_R ≤ 22 nF → Y5V, Y5U ≤ 7.5%
C_R > 22 nF → Y5V, Y5P ≤ 5.0%
Y5P → ±20% / -20 +50%
Y5U → ±20% / -20 +50%
Y5V → -20% +50% / -20 +80%
≥12 MΩ
4.7 nF...100 nF → ≥ 10 MΩ
200 nF → ≥ 1 MΩ
≥ 100 MΩ
Vt = 1.25 V_R
V_R = 25V Vt = 100V (DC)
V_R = 50V Vt = 150V (DC)
-30... +85ºC
30 / 85 / 21
15