5NS247KNBLM-G Datasheet, PDF (1/4 Pages) AVX Corporation – Disc Ceramic Capacitors

Disc Ceramic Capacitors
General Specifications - Class II General Purpose
DIELECTRIC - CLASS II
These ceramic capacitors have a high dielectric constant,
what makes possible high capacitance values in
reduced dimensions, however temperature coefficient and
loss factor are greater than Class I.
Typical applications are decoupling and by pass.
Meets IEC 384-9 (1988).
HOW TO ORDER
5M
K
101
K
A
B
A
A
Product Code
Voltage
Capacitance
Tolerance
Lead
Forming
Capacitor
Diameter
Finishing
Packaging
100V / 500V PERFORMANCE CHARACTERISTICS CLASS II
Voltage Rating
100V ... 500V
1kV ... 5kV
Measured at
Dissipation Factor (%)
Tolerance
Insulation
Resistance (IR)
Dielectric Strength
NOTE: Charging
current limited
to 50 mA
dV/dt test
Operating
Temperature
Range (ºC)
Climatic
Category
1.0 kHz @ 0.3 Vrms / 25ºC
Y5E / Y5F / Y5P ≤ 2.5%
Y5U / Y5V / Z5V ≤ 3.0%
C_R < 10 pF → ±0.25 pF, ±0.5 pF
C_R ≥ 10 pF → ±5%, ±10%
@ V_R → ≥ 10 GΩ
@ V_R = 100V → Vt = 250V (DC)
@ V_R = 500V → Vt = 1250V (DC)
–
-30... +85ºC
30 / 085 / 21 Phenolic Coated
1.0 kHz @ 0.3 Vrms / 25ºC
Y5F ≤ 2.5%
Y5U / Y5V ≤ 3.0%
C_R < 10 pF → ±0.25 pF, ±0.5 pF
C_R ≥ 10 pF → ±5%, ±10%
@ 500V → ≥ 10 GΩ
1.5 x V_R + 500 (DC)
up to 3.0 kV/µsec for 5NR; 5NS Series
-30 ... +85ºC Phenolic Coated
-30 ... +125ºC Epoxy Coated
30 / 85 / 21 Phenolic Coated
30 / 85 / 56 Epoxy Coated
Note: Damp Heat Steady State: 90... 95% R.H. 40ºC / 21 days. No voltage to be applied.
11