145801020002829 Datasheet, PDF (1/3 Pages) AVX Corporation – 0.4mm Pitch Series 5801

0.4mmPitch Series5801
ࠪ࡝࡯࠭
㧔Series㧕
5801
ၮ᧼㑆㜞ߐ
㧔Stacking Height㧕
0.8mm
ᭂ㑆㓒
㧔Pitch㧕
0.4mm
ᭂᢙ
㧔No. of Positions㧕
10㨪80
ቯᩰ㔚ᵹ
㧔Rated Current)
AC/DC 0.3A
ቯᩰ㔚࿶
㧔Rated Voltage㧕
AC/DC 50V
⠴㔚࿶
㧔D.W.Voltage㧕
AC 250Vrms/min.
ࠦࡦ࠲ࠢ࠻᧚⾰
㧔Contact Material)
㌃ว㊄ Copper alloy
ࠗࡦࠪࡘ࡟࡯࠲᧚⾰
㧔Insulator Material)
⠴ᾲ᮸⢽ Heat resistance plastic
૶↪᷷ᐲ▸࿐
㧔Operating Temperature)
㧙40㨪85ḥ
SERIES 5801
٠᭎ⷐ
5801ޔߪ࠭࡯࡝ࠪᏒ႐ߦ߅ߌࠆ៤Ꮺ㔚⹤ޔPHS࡞࠲ࠫ࠺ޔAVᯏེߩዊဳൻဳ⭯ޔൻߩⷐ᳞ߦၮߠ߈㐿⊒ߐࠇߚޔ0.4mmࡇ࠶࠴ߩ⿥ૐ⢛ၮ᧼ኻၮ
ޕߔߢ࠲ࠢࡀࠦ᧼ၮ᧼㑆㜞ߐ0.8mm┵ޔሶࠍ฽߼ߚ᏷ኸᴺߪ5.0mmࠍታ⃻ߒ߹ߒߚޕ
Ù Outline
Series 5801 is a 0.4mm pitch Board to Board connector to meet the market requirement for downsizing and thinner tendency in
cellular phones, PHS, and Digital AV apparatus. 0.8mm in stacki ng height and 5.0mm in width including tails are realized.
٠․㐳
(1) ࡃࡀ᭴ㅧߦᑷ␠⁛⥄ߩޟSሼ⁁߫ߨࠍޠណ↪ޕ፰ว㜞ߐH=0.8㨙㨙ߩૐ⢛ൻࠍታ⃻ߒ߹ߒߚޕ
(2) ࠬ࡝ࡓ࡮ૐ⢛ߢ޽ࠅߥ߇ࠄࠦࡀࠢ࠲ⵣ㕙ߪᐩო߇ᒻᚑߐࠇߡ߅ࠅ㊄ዻߩ㔺಴߇ߥߊ࠺࠶࠼ࠬࡍ࡯ࠬ߇ዊߐ޿ߎߣ߆ࠄ┵ޔሶߩ࡜ࡦ࠼ኻะ㑆ߦࡄ࠲
࡯ࡦ㈩✢߇น⢻ߢ޽ࠅޔ㜞ኒᐲታⵝߦᦨㆡߥ᭴ㅧߢߔޕ
(3) 㜞޿ធ⸅ା㗬ᕈࠍታ⃻ߔࠆߚ߼ߦޔធ⸅᭴ㅧߪᝄേ߿⪭ਅⴣ᠄ߦᒝ޿᜽ߺㄟߺ᭴ㅧࠍណ↪ߔࠆߣߣ߽ߦޔធ⸅ㇱߪ㘧ᢔߒߚࡈ࡜࠶ࠢࠬ߿ઃ⌕ߒߚ
⇣‛ࠍឃ㒰ߔࠆ⁛⥄ធὐ᭴ㅧࠍណ↪ߒ߹ߒߚޕ
(4) ፰ว᭴ㅧߪޟFINE-LOCK᭴ㅧࠍޠណ↪ߒ⿥ޔૐ⢛ߣఝࠇߚࠢ࡝࠶ࠢᗵ࡮㜞޿፰ว଻ᜬജߣߩਔ┙ࠍታ⃻ߒ߹ߒߚޕ
(5) ࿕ቯ㊄ౕߪ ࠢ࠶ࡠޔᒝᐲߩ⵬ᒝߣޔ㔚᳇⊛ߦធ⛯ࠍน⢻ߣߒߡ߅ࠅ߹ߔޕᓥߞߡޟGROUNDޟޔޠPOWERߩߤߥޠᣂߚߥ↪ㅜߦ᦭ലߦᵴ↪޿ߚ
ޕߔ߹ߌߛ
(6) ࠦࡀࠢ࠲ߦ፰วߐߖޔዉㅢޔ⍴⛊ࠍ◲ᤃߦ࠴ࠚ࠶ࠢߔࠆ࠴ࠚ࠶ࠞ࡯ࠦࡀࠢ࠲߽ߏ↪ᗧߒߡ߅ࠅ߹ߔޕ
Ù Features
(1) KEC-unique S-shaped spring is adopted for the spring structure, which realizes the lowest profile of 0.8mm in this field.
(2) Because no part of pins were exposed owing to the bottom wall of the connector in spite of its slim and low profile, a pattern
can be laid between lands of tail rows, which enables less limited pattern layouts on boards.
(3) The pinching structure, highly resistant to vibration and drop shock, is adopted in contacts and the original structure exclud-
ing splashed flux or foreign matters attached is adopted on contacting points in order to obtain high contacting reliability.
(4) "Fine locking mechanism" adopted for mating structure realizes the nice clicking response and firm retention force against
unmating despite of the ultra low profile.
(5) The metal tab reinforces the locking strength and is utilized for electrical connection such as "Ground", "Power" line or so.
(6) A checker connector to be mated with a connector is also available to check electrical continuity or short circuit of the connector.
ᧄࠞ࠲ࡠࠣߦߪផᅑ߼ߞ߈ࠍឝタߒߡ߅ࠅ߹ߔ߈ߞ߼ޕ⒳㘃࡮઀᭽ߦ߮ࠄߥޔ
↢↥ኻᔕน⢻ᭂᢙߦߟ޿ߡߪ༡ᬺㇱߦᓮ⏕⹺㗿޿߹ߔޕ
Recommended plating types are mentioned in this catalogue.
For other plating types and their specifications, and available num-
bers of positions, please feel free to contact our sales depart ment.