11-9159 Datasheet, PDF (1/2 Pages) AVX Corporation – Solid State Lighting Connector Update

AVX Corporation continues to develop new
connectors and accessories specifically for the
Solid State Lighting (SSL) market. This 2nd
generation brochure captures our entire family of
Board-to-Board and Wire-to-Board connectors
in a simple matrix format with additional
application views. All of these connectors have
been developed based on customer application
requirements with simplicity, modularity and
reliability as the key driving factors. AVX is
committed to the SSL market, our technology
road map contains leading edge passive
electronic components and connectors to meet
the demanding market requirements for the
future lighting systems. Today we offer:
CONNECTORS
• Wire to Board – Series 9175, 9176, 9177
• Board to Board – Series 9159
CIRCUIT & TRANSIENT PROTECTION
• TransGuard – VC Series
• MultiGuard – MG Series
• EMI Filters – W2/W3 Series
• TransFeed – V2F Series
CAPACITORS
• Input Capacitors – OxiCap^® (fail / safe),
HiCV, Flexiterm^®
• Output Capacitors – Oxicap^® (fail / safe),
Flexiterm^®, HiCV
• Capacitor Array – voltage doublers
• BestCap^® (supercapacitor) – LED Camera
Flash
Products used in:
• Off-line AC (120 V or 220 V)
• Low voltage 12 to 24 VAC / DC
• Specialty Applications 37.5V, 75V, etc.
• Battery Operation 3v to <12v
Typical Schematics
LED Driver Topologies – BUCK
NbO or High CV MLCC
(Depending on output voltage)
Vin
Switch
L1
C1
D1
NbO or High CV MLCC
(Depending on input voltage)
IC1
OUT
PWM _FB
GND
Gnd
C2
R1
Buck, or step-down, voltage converters
produce an average output voltage lower than
the input source voltage.
T-Guard
LED Driver Topologies – BOOST
NbO or High CV MLCC
(Depending on output voltage)
Vin
L1
D1
T-Guard
C1
Q1
NbO or High CV MLC
IC1
OUT
PWM FB
GND
Gnd
C2
R1
Boost, or step-up, converters produce an
average output voltage higher than the
input source voltage.
Two AVX
Caps!
INTER_CONNECT
NEWUPPRDOATDEUCT
LED Driver Topologies – BUCK/BOOST
NbO or High CV MLCC
(Depending on input voltage)
Vin
Switch
D1
T-Guard
C1
C2
IC1
OUT
L1
PWM FB
NbO or High CV MLCC
(Depending on input voltage)
GND
R1
Gnd
• A combination of buck and boost.
• Output is inverted, and its magnitude can be less or
greater than the input.
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales
Office for the latest specifications. All statements, information and data given herein are believed
to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any
kind, expressed or implied. Statements or suggestions concerning possible use of our products
are made without representation or warranty that any such use is free of patent infringement and
are not recommendations to infringe any patent. The user should not assume that all safety
measures are indicated or that other measures are indicated or that other measures may not be
required. Specifications are typical and many not apply to all applications.
A KYOCERA GROUP COMPANY
www.avx.com
S-SSL10M1009-N
Solid State Lighting
Connector Update